Australia version. Counts Australian standard drinks (10 g), starts with a 375 ml can, a 150 ml glass of wine and a 30 ml nip, and compares the estimate with Queensland's 0.05 general limit and zero limit. US version
BAC Calculator (Australian standard drinks)
Estimate blood alcohol from cans, schooners, glasses of wine and nips in Australian standard drinks (10 g), against the 0.05 limit and the zero limit for P-platers.
The interactive tool loads here when JavaScript runs.
About this toolWhat is the BAC Calculator?
An Australian standard drink is 10 g of pure alcohol. Almost no drink is exactly one: a 375 ml can of full-strength 4.8% beer is 1.4, a 425 ml schooner of the same beer is 1.6, a 150 ml restaurant glass of 13% wine is 1.5 and a 30 ml nip of 40% spirits is about one. This version counts in Australian standard drinks and starts with those serves, so the total matches what the label and the bar actually pour.
For drivers on a full or open licence the general limit is 0.05: in Queensland you are over it at 0.05 or more. Learner and provisional (P1 and P2) drivers have a zero limit, and Queensland applies the same "no alcohol" limit to probationary and restricted licences and to drivers of trucks over 4.5 tonnes, buses, taxis and dangerous-goods vehicles. The limits table uses Queensland's rules; other states set their own licence classes, so check your state transport authority.
The Widmark estimate here is an average for someone of your weight and sex. Real blood alcohol can be much higher, and impairment starts below 0.05. Random breath testing means you can be tested at any time, so use this only to understand how standard drinks add up and how slowly alcohol clears, never to decide you are right to drive.
- Widmark formula with the original 0.68 and 0.55 body water factors
- Editable sizes and ABV for beer, wine, spirits and other drinks
- Standard drinks for the US, UK, Canada, Australia, New Zealand, Ireland and WHO
- Time to fall below 0.08%, 0.05%, 0.02% and zero
- Legal limit sets to compare against, including the UK, Canada, Queensland, Ireland and New Zealand
- Shown in %, g/L and mg/100 mL, with the working
Updated
How to use the BAC Calculator
- Enter your weight in kilograms and choose your sex for the Widmark factor.
- Count each drink since the first. Change the size to match your glass (glass names and sizes vary by state, so check the volume, not the name) and the ABV for mid-strength or craft beer.
- Enter the hours since your first drink and keep the standard drink definition on Australia.
- Read the estimate and the time until it falls below 0.05. Both are averages: Queensland notes BAC can keep rising for 30 to 60 minutes after you stop drinking, and L and P-plate drivers must not drink at all before driving.
Worked examples
Four cans at a barbecue, 85 kg man
Input
Four 375 ml cans of 4.8% beer, 85 kg, male, 2 hours since the first
Output
56.8 g of alcohol, 5.7 standard drinks; estimated 0.068% now; about 1 h 13 min to fall below 0.05; about 4 h 33 min to reach zero
Four cans sound like four drinks but are nearly six standard drinks. After two hours the estimate is still over 0.05, and an hour or more later it may be under it while the person is still affected.
Two glasses of wine with dinner, 62 kg woman
Input
Two 150 ml glasses of 13% wine, 62 kg, female, 1 hour since the first
Output
30.8 g of alcohol, 3.1 standard drinks; estimated 0.075% now; about 1 h 41 min to fall below 0.05; about 5 h 01 min to zero
Two generous restaurant glasses are three standard drinks, enough to put a lighter person well over 0.05 in the estimate an hour later.
One middy for a P-plater
Input
One 285 ml middy of 4.8% beer, 70 kg, male, 1 hour later
Output
10.8 g of alcohol, 1.1 standard drinks; any alcohol is over the zero limit
For an L or P-plate driver the limit is zero, so even one small beer puts them over it. Queensland notes BAC can keep rising for 30 to 60 minutes after you stop drinking, so the only safe plan is not to drink before driving.
Background and insight
Erik Widmark, a Swedish chemist, published the equation in 1932: concentration = alcohol dose / (body weight × r), minus an elimination rate multiplied by time. The factor r is the share of body mass that alcohol dissolves into, essentially body water. Widmark measured averages of 0.68 for men and 0.55 for women; women typically have more body fat and less water per kilogram, so the same drinks produce a higher concentration. Forensic toxicologists still use the formula, but always with a range for r and for elimination, because both vary from person to person.
Grams of alcohol are volume × ABV × 0.789, the density of ethanol. A US standard drink is 14 g (0.6 fl oz of pure alcohol), equal to 12 fl oz of 5% beer, 5 fl oz of 12% wine or 1.5 fl oz of 40% spirits. A UK unit is 10 mL or 8 g. Canada defines a standard drink as 17.05 mL (13.45 g), and Australia, New Zealand and Ireland use 10 g. The same pint (568 mL) of 4.5% lager holds about 20 g of alcohol: 2.5 UK units, 1.4 US standard drinks or 2.0 Australian standard drinks.
The liver clears alcohol at a fairly constant rate, typically 0.010 to 0.020% per hour; this page uses 0.015%. Nothing speeds it up. Food in the stomach slows absorption, so the peak arrives later and lower, but it does not remove alcohol. BAC here is shown as a percentage (grams per 100 mL); 0.08% equals 0.8 g/L or 80 mg/100 mL, the units used in UK law.
Common use cases
Understanding standard drinks
See how a large glass of wine or a strong craft beer counts in your country's units.
Planning the morning after
Get a sense of how long alcohol may still be in your system before an early start.
Health and education
Show students or patients how weight, sex and drink size change blood alcohol.
Comparing drinking guidelines
Translate the UK 14 units a week or US two-drink daily guidance into the drinks you actually pour.
Tips and limitations
- Read the standard drinks figure on the can or bottle label and use it to check your sizes and ABV here.
- Mid-strength beer (around 3.5%) in a 375 ml can is about one standard drink; full strength is about 1.4.
- Glass names and sizes vary by state; check the volume, not the name, and the standard drinks figure on the label.
- Queensland also has middle (0.10) and high (0.15) alcohol limits that bring heavier penalties. These are offence levels, not targets.
Sources and further reading
- Alcohol limits, Queensland Government. No alcohol, general (0.05), middle (0.10) and high (0.15) limits, and who each applies to.
- Know your standard drinks, healthdirect (Australian Government). A standard drink contains about 10 g of alcohol; a 425 ml schooner of 4.8% beer is 1.6 standard drinks.
- How alcohol affects your health, healthdirect (Australian Government). A cold shower or coffee does not lower your BAC; the only way to lower it is with time.
- Tips for safe and responsible drinking, healthdirect (Australian Government). The body can only process about one standard drink an hour.
Frequently asked questions
What is the drink-driving limit in Australia?
For full or open licence holders the general limit is 0.05; in Queensland you are over it if your blood or breath alcohol is 0.05 or more. Learner and provisional drivers have a zero limit, and some heavy, public passenger and dangerous-goods vehicle drivers have lower limits. States set the rules, so check yours.
How many standard drinks can I have and stay under 0.05?
There is no reliable number. The first example shows four cans, nearly six standard drinks, keeping an 85 kg man over 0.05 two hours later, and the second shows two glasses of wine taking a 62 kg woman over it. Weight, food, the serve size and your own metabolism all change the answer.
Can P-platers drink anything before driving?
No. Learner, P1 and P2 drivers must have a zero blood or breath alcohol reading. In Queensland that also applies to probationary and restricted licence holders, and to riders in their first year on a class RE motorcycle licence.
How many standard drinks are in a schooner, a can or a glass of wine?
Worked out from 10 g per standard drink: a 425 ml schooner of 4.8% beer is 1.6, a 375 ml can of 4.8% beer is 1.4, a 285 ml middy is 1.1, a 150 ml glass of 13% wine is 1.5 and a 30 ml nip of 40% spirits is 0.95.
How long does a standard drink take to wear off?
healthdirect says the body can process about one standard drink an hour, but people vary. The calculator uses an average fall of 0.015% an hour, which is close to one standard drink (about 8.7 g) an hour for an 85 kg man; a lighter person, especially a woman, clears less on the same rate, about 5 g, half a standard drink, for a 62 kg woman. healthdirect notes that a cold shower or coffee does not lower your BAC; only time does.
Do I need to worry the morning after?
Yes. A big night can leave you over 0.05, and certainly over zero, well into the next morning. Enter the full night's drinks and the hours since the first to see the estimate, then allow extra time.
Is there an in-depth guide to the BAC Calculator?
Yes. “How Blood Alcohol Is Estimated: Widmark, Standard Drinks and Time” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.