Australia version. Metric by default, in cc and litres, with the 660 cc and 150 kW per tonne limits NSW sets for learner and provisional riders' motorcycles. US version

Engine Capacity Calculator

Engine capacity in cc and litres from bore and stroke in mm, with a check against the 660 cc limit for LAMS learner and P-plate motorcycles in NSW.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Engine Displacement Calculator?

Australians call it engine capacity, quoted in cc for motorcycles and litres for cars. This version works in millimetres and cc: give it the bore, the stroke and the number of cylinders and it returns the capacity, the per-cylinder volume and the bore/stroke ratio, plus what an oversize piston would add.

For riders the number that matters most is 660. In NSW, learner and P-plate riders must ride a motorcycle on the approved list, which requires an engine capacity of 660 cc or less and a power-to-weight ratio of 150 kW per tonne or less (electric motorcycles up to 25 kW). The NSW Government also says motorcycles cannot be modified or restricted to be reclassified as approved, so a big-bore kit on a bike near the limit is worth checking first.

  • Displacement in cc, litres and cubic inches at once, with per-cylinder volume
  • Solve for bore or stroke from a target displacement in any of the three units
  • Overbore gain, bore/stroke ratio with oversquare or undersquare label, and mean piston speed
  • Inch and millimetre inputs that convert in place, plus a table for other cylinder counts
  • Copy results and share a link with your inputs
Read the guide: Engine Displacement Explained: Bore, Stroke, CC and Cubic Inches

Updated

How to use the Engine Displacement Calculator

  1. Choose inches or millimetres for bore and stroke.
  2. Leave "Solve for" on Displacement and enter bore, stroke and the number of cylinders.
  3. Read total displacement in cc, litres and cubic inches, plus the per-cylinder volume and bore/stroke ratio.
  4. To plan a rebore, enter the oversize (for example 0.030 in) and read the new displacement and the gain.
  5. To hit a target size, switch "Solve for" to Bore or Stroke, enter the target in cc, litres or cubic inches, and read the required dimension.

Worked examples

A 650 twin and a 1 mm oversize

Input

83 mm bore, 60 mm stroke, 2 cylinders, 1 mm overbore

Output

649.27 cc standard; 665.01 cc after the rebore

At standard size the engine is under the 660 cc limit. A 1 mm oversize takes it 5 cc over, so the bike no longer matches the approved specification.

Largest bore under 660 cc

Input

Solve for bore, 60 mm stroke, 2 cylinders, target 660 cc

Output

Bore 83.68 mm

With this stroke, about 0.7 mm of extra bore is all the room there is below 660 cc.

A square two-litre four

Input

86 mm bore, 86 mm stroke, 4 cylinders

Output

1,998.23 cc (2.0 L), bore/stroke 1.000

Car engines are badged in litres. This one is sold as a 2.0 even though it is 1.8 cc short.

Background and insight

One cylinder sweeps a cylinder of air with the bore as its diameter and the stroke as its height: V = π/4 x bore² x stroke. Multiply by the cylinder count for the engine total. Because bore is squared, it moves displacement faster than stroke does: a 1% larger bore adds about 2% volume, a 1% longer stroke adds 1%. One cubic inch is exactly 16.387064 cc, since the inch is defined as 25.4 mm.

Advertised sizes are rounded. A Honda K20 is 86 x 86 mm, which works out to 1,998.2 cc and is sold as a 2.0 litre; Ford's 302 measures 301.6 cu in. Rotary and two-stroke engines are counted differently for racing and tax purposes, so check the rulebook if a class limit is at stake.

The bore/stroke ratio says something about character. Oversquare engines (ratio above 1) have room for larger valves and lower piston speed at a given rpm, so they tend to rev; undersquare engines trade that for a compact chamber and strong low-speed torque. Mean piston speed, 2 x stroke x rpm, is a rough check on how hard the rotating parts work: around 20 m/s is common for road engines at their redline, and racing engines run higher with lighter parts.

Common use cases

  • Engine builds and strokers

    Plan the bore and stroke combination that reaches a target size, and see what a rebore adds before the block goes to the machine shop.

  • Class and registration limits

    Check a motorcycle, kart or race engine against a displacement limit after an overbore.

  • Spec sheet checks

    Confirm a quoted engine size from published bore and stroke, and convert between cc, litres and cubic inches.

  • Teaching engine basics

    Show how bore, stroke and cylinder count combine, and why bore has twice the effect of stroke on volume.

Tips and limitations

  • The approved list is checked against the manufacturer's data for the model, not your own measurement. Use the calculator to understand the margin, then check the official list for the bike.
  • Victoria, Queensland and the other states run their own approved-motorcycle schemes. Check your state transport authority before buying.
  • Engine changes that raise capacity or power on a registered vehicle may need certification in your state; ask your registration authority before the work starts.
  • Australian workshops quote oversizes in mm (0.25, 0.50, 1.00 mm). Enter the oversize in the overbore field.

Sources and further reading

  1. Approved motorcycles for learner and provisional riders, NSW Government. 660 cc and 150 kW per tonne limits; no modification to qualify
  2. Engine displacement, Wikipedia

Frequently asked questions

What engine size can a learner ride in NSW?

A motorcycle on the approved list for novice riders: engine capacity 660 cc or less and a power-to-weight ratio of 150 kW per tonne or less, or up to 25 kW for an electric motorcycle. Learner, P1 and P2 riders must ride one.

Can I put a big-bore kit on a LAMS bike?

Raising the capacity changes the bike from its approved specification. On the 650 twin example a 1 mm oversize takes it to 665 cc, over the 660 cc limit, so a novice rider could no longer ride it.

How do I calculate engine capacity?

Capacity = 0.7854 x bore² x stroke x cylinders, with bore and stroke in centimetres for an answer in cc. For 83 mm x 60 mm and two cylinders: 0.7854 x 8.3² x 6.0 x 2 = 649 cc.

What is the difference between cc and litres?

1,000 cc is one litre. Motorcycles are usually described in cc and cars in litres to one decimal place, so 1,998 cc becomes a 2.0 litre.

Does a rebore change my registration?

It changes the engine capacity, which is part of the vehicle's description. Rules differ by state, so check with your registration authority and insurer before a rebore that changes the capacity noticeably.

Is there an in-depth guide to the Engine Displacement Calculator?

Yes. “Engine Displacement Explained: Bore, Stroke, CC and Cubic Inches” covers the background, how it works, common pitfalls and worked examples. Read the full guide.