Australia version. Uses the ABS Consumer Price Index for the eight capital cities (calendar-year averages, 1949 to 2025) in Australian dollars, with the RBA target as the default forecast rate. US version
Inflation Calculator (Australia)
See what Australian dollars from any year since 1949 are worth today with the ABS Consumer Price Index, or project prices at the RBA's 2 to 3% target band.
The interactive tool loads here when JavaScript runs.
About this toolWhat is the Inflation Calculator?
This version runs on the Australian Bureau of Statistics Consumer Price Index, all groups, weighted average of the eight capital cities. ABS publishes the index by quarter; each year here is the mean of its four quarters. A$100 of shopping in 2000 cost A$199.57 in 2025, so prices roughly doubled over 25 years, an average of 2.80% a year.
Use it to check whether a pay rise kept up with prices, to restate an old house price or salary in current dollars, or to compare costs across decades. For future prices, switch to an assumed rate. The Reserve Bank's goal is annual consumer price inflation between 2 and 3%, so 2.5% is a sensible middle case, with a higher rate as a stress test.
Prices before February 1966 were in pounds, shillings and pence, while this calculator treats every year as dollars. For pre-decimal amounts, use the RBA's own inflation calculator, which handles the change of currency.
- Official BLS CPI-U annual averages for every year from 1913 to 2025
- Forward and backward conversion between any two years
- Constant-rate projection of future prices and purchasing power
- Cumulative change and average yearly inflation shown with the formula
- Year-by-year line chart of the equivalent amount
- Works offline after loading, with copy and share links
Updated
How to use the Inflation Calculator
- Keep Australia CPI (ABS) as the price index.
- Enter the amount in dollars, the year it is from and the year to compare it with (up to 2025).
- Read the equivalent amount, the total price change and the average yearly rate.
- For a forecast, choose Assumed inflation rate, enter 2.5% for the middle of the RBA band, and set the number of years.
Worked examples
A$100 in 2000 money
Input
ABS CPI; A$100; from 2000 to 2025
Output
A$199.57; prices up 99.57%, or 2.80% a year on average
The index rose from 49.63 to 99.045 on the September 2025 = 100 base. A$100 in 1980 would be A$541.29 in 2025, at 3.82% a year.
Did a 2015 salary keep up?
Input
ABS CPI; A$70,000; from 2015 to 2025
Output
A$92,720.16 in 2025 dollars; prices up 32.46%
Someone on A$70,000 in 2015 needed about A$92,700 in 2025 to buy the same. From 2020 to 2025 alone prices rose 22.84%, about 4.20% a year, well above the RBA band.
A A$100,000 cost in 20 years
Input
Assumed rate; A$100,000 today; 2.5% a year; 20 years
Output
A$163,861.64 in 20 years
At 3%, the top of the band, it would be A$180,611.12. Turned around, A$1,000,000 in 30 years at 2.5% has the buying power of A$476,742.69 today, worth knowing for super projections.
Background and insight
The CPI-U measures the average change in prices paid by urban consumers for a fixed basket of goods and services. BLS publishes it monthly with a reference base of 1982-84 = 100, and also publishes an annual average for each year. This tool uses those annual averages, series CUUR0000SA0 (all items, US city average, not seasonally adjusted), taken from the official BLS LABSTAT data file. The latest complete year is 2025; BLS marks the October 2025 monthly index as unavailable, so its 2025 annual average is computed from the other eleven months.
Converting between years is a ratio: value in year B = amount × CPI(B) ÷ CPI(A). In 2000 the annual CPI-U was 172.2 and in 2025 it was 321.943, so 100 dollars of 2000 spending power equals about 186.96 dollars in 2025. The average annual rate between two years is the compound rate that links them, (CPI(B) ÷ CPI(A))^(1/years) − 1, which for 2000 to 2025 is 2.53% a year.
For the future there is no index yet, so the second mode compounds an assumed rate: future cost = amount × (1 + r)^t, and today's value of a future amount = amount ÷ (1 + r)^t. The US Federal Reserve targets 2% a year measured by a different index (PCE), so 2% to 3% is a common planning range for US dollars. Other countries publish their own consumer price indexes, and their long-run rates differ.
Common use cases
Comparing historical prices and wages
Put an old salary, house price or ticket price into current dollars before comparing it with today's figure.
Checking whether a raise kept up
Convert last year's pay to this year's dollars to see whether a raise beat inflation or was a real cut.
Retirement and long-term goals
Inflate today's spending or a goal amount to the year you need it, then plan savings against the bigger number.
Contracts and escalation clauses
Estimate what a CPI-linked rent, alimony or contract payment would be after several years of indexing.
Tips and limitations
- Use calendar years here. Pay rises and budgets often run on the 1 July to 30 June financial year, so a calendar-year comparison is close but not exact.
- The CPI is an average for capital-city households. Your own costs may rise faster or slower, depending on rent, mortgage, fuel and childcare.
- Super and retirement figures are usually shown in current dollars. Use the assumed-rate mode to turn a future balance into current dollars and compare like with like.
- For amounts before 1966, convert from pounds first or use the RBA's pre-decimal calculator.
Sources and further reading
- Consumer Price Index, Australia, Australian Bureau of Statistics. Index reference period September 2025 = 100; first complete Monthly CPI publication in October 2025.
- Inflation overview, Reserve Bank of Australia. Goal of annual consumer price inflation between 2 and 3%.
- Inflation Calculator, Reserve Bank of Australia. Calendar, financial-year and quarterly versions; pre-decimal values in pounds before 1966.
Frequently asked questions
Which CPI does this Australian inflation calculator use?
The ABS Consumer Price Index, all groups, weighted average of the eight capital cities, on the September 2025 = 100 base. ABS published it quarterly for most of its history; each annual figure here is the mean of that year's four quarters.
Does it use the new monthly CPI?
No. The ABS began publishing a complete monthly CPI with its October 2025 release and still publishes quarterly figures in its tables. This calculator uses calendar-year averages of the quarterly index, so recent months are not included until a full year is available.
What is the RBA's inflation target?
To keep annual consumer price inflation between 2 and 3%, with policy set so inflation returns to the middle of that band. That is why the forecast mode starts at 2.5%.
Can I use it for prices from before decimal currency?
Only if you convert to dollars first. Australia changed from pounds to dollars in February 1966, and this tool treats every year as dollars. The RBA's inflation calculator shows pre-decimal values in pounds.
Why is my result different from the RBA calculator?
The RBA offers calendar-year, financial-year and quarterly versions, and goes back to 1901 using older retail price indices. This tool uses calendar-year averages of the ABS CPI from 1949, so financial-year or quarterly comparisons will differ slightly.
Is there an in-depth guide to the Inflation Calculator?
Yes. “Saving for a Goal When Prices Keep Rising” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.