Canada version. Canadian version: GDS and TDS instead of US debt-to-income, checked against CMHC's 39% and 44% limits, with heating, property taxes and half of condo fees in housing. US version
GDS and TDS Ratio Calculator (Canada)
Work out your gross debt service (GDS) and total debt service (TDS) ratios in Canadian dollars and check them against CMHC's 39% and 44% limits.
The interactive tool loads here when JavaScript runs.
About this toolWhat is the Debt-to-Income Ratio Calculator?
Canadian lenders do not use the US front-end and back-end DTI. They use gross debt service (GDS), your housing costs as a share of gross income, and total debt service (TDS), housing plus every other debt payment. CMHC caps insured mortgages at GDS 39% and TDS 44%. Housing means principal and interest, property taxes and heating, plus 50% of any condo fees.
The payment in GDS is not your contract payment. Lenders qualify you at the greater of the contract rate plus 2 points or 5.25%. A $560,000 mortgage at a 4.19% five-year fixed rate over 25 years costs $3,003.68 a month, but at the 6.19% qualifying rate it is $3,646.40, and that is the figure to enter. With $425 of property tax and $130 of heating, housing comes to $4,201.40.
On a $135,000 household income that is a GDS of 37.35%, under 39%. A $650 car payment takes TDS to 43.12%, just inside 44%; a further $450 of payments would push it to 47.12% and over the limit. The calculator shows how much room you have left under 44%.
- Front-end and back-end ratios
- Annual or monthly income entry with other income
- Six debt categories plus housing
- Comparison with 28/36, conventional, FHA, VA and USDA limits
- Room before 36% and a colour-coded scale
Updated
How to use the Debt-to-Income Ratio Calculator
- Choose annual or monthly and enter gross income, plus any other regular income you can document.
- Enter your monthly housing payment. For a mortgage application use the new payment including tax, insurance, PMI and HOA.
- Enter the monthly payment on each debt: car, student loans, card minimums, personal loans, support you pay and anything else.
- Read the back-end ratio, the front-end ratio and where you sit on the scale.
- Check the lender limits table and the room under 36% before applying.
Worked examples
Within both CMHC limits
Input
Household income $135,000; housing $4,201.40 (P&I at the 6.19% qualifying rate, $425 property tax, $130 heating); car loan $650
Output
GDS 37.35%; TDS 43.12%
Both ratios pass. Room under 44% is only $98.60 a month, so a new credit card balance or car could tip it.
Over the TDS limit
Input
Same household, other debt payments $1,100 a month
Output
GDS 37.35%; TDS 47.12%
GDS still passes, but TDS is over 44%. Paying off a debt, a larger down payment or a lower price brings it back in line.
Background and insight
DTI is a simple ratio: monthly debt payments divided by gross monthly income, before tax. The front-end or housing ratio counts only the housing payment: principal, interest, property tax, homeowners insurance, mortgage insurance and HOA dues. The back-end ratio adds every other recurring debt obligation that appears on a credit report or a court order, such as car loans and leases, student loans, credit card minimums, personal loans, and child support or alimony.
Typical limits differ by program. Fannie Mae's Selling Guide (B3-6-02) caps manually underwritten conventional loans at 36%, or 45% with strong credit and reserves, and allows up to 50% through Desktop Underwriter. HUD's Handbook 4000.1 uses 31% front-end and 43% back-end for manually underwritten FHA loans. VA uses a 41% guideline alongside a residual income test, and USDA guaranteed loans use 29% and 41%. The 43% figure often quoted comes from the original Qualified Mortgage rule; the CFPB replaced that hard cap with a price-based test in a rule finalized in December 2020.
Expenses that are not debts, such as utilities, phone bills, groceries, insurance premiums and transport costs, are left out of DTI. That is why a ratio a lender accepts can still leave a tight budget.
Common use cases
Before applying for a mortgage
See whether your ratios are inside typical limits for the loan program you plan to use.
Before taking on a car loan
Check how a new payment would affect a mortgage application later in the year.
Choosing which debt to pay off
Find the payoff that drops your back-end ratio below a threshold fastest.
Personal budgeting
Track your debt load over time as a single number.
Tips and limitations
- Work the mortgage payment out at the qualifying rate, not your contract rate; the mortgage calculator can do this.
- Add 50% of condo fees to the housing payment.
- For a line of credit or credit card, lenders count a required monthly payment even if you pay more.
- Both partners' incomes and debts count on a joint application.
Sources and further reading
- Calculating GDS / TDS, Canada Mortgage and Housing Corporation. CMHC restricts GDS to 39% and TDS to 44%, includes 50% of condo fees, and qualifies at the greater of the contract rate plus 2% or 5.25%.
- Minimum qualifying rate for uninsured mortgages, Office of the Superintendent of Financial Institutions. Uninsured mortgages qualify at the greater of the contract rate plus 2% or 5.25%.
Frequently asked questions
What are the GDS and TDS limits in Canada?
For CMHC-insured mortgages, GDS can be at most 39% and TDS at most 44% of gross household income. Private insurers and lenders on uninsured mortgages set their own limits, which can differ.
What goes into the GDS ratio?
Principal and interest, property taxes and heating, plus 50% of condo fees if there are any. Ground or site rent is included in full on leasehold properties.
What rate do lenders use for GDS and TDS?
The qualifying rate: the greater of your contract rate plus 2% or 5.25%. CMHC applies it to insured mortgages, and OSFI sets the same minimum for uninsured mortgages at federally regulated lenders.
Do lenders use gross or net income?
Gross income, before tax and deductions. Include salary, and other income your lender accepts, such as steady overtime or rental income.
Is the stress test the same for renewals?
OSFI exempts straight switches at renewal from the minimum qualifying rate if the loan amount and amortization do not increase.
Is there an in-depth guide to the Debt-to-Income Ratio Calculator?
Yes. “Car Loans, Leases and Paying Off Debt: The Numbers That Matter” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.