United Kingdom version. UK version: prices and deposits in pounds, no PMI (UK lenders price small deposits into the rate instead), service charge for leasehold flats, and overpayments. US version

Mortgage Repayment Calculator (UK)

Monthly mortgage repayments in pounds from the property price, deposit, rate and term, with overpayments, service charge and a full repayment schedule.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Mortgage Calculator?

A UK repayment mortgage of £270,000 at 4.5% over 25 years costs £1,500.75 a month. That is the number lenders and brokers quote: capital and interest together, paid monthly, with nothing added for mortgage insurance. British lenders do not charge borrowers PMI; a smaller deposit shows up as a higher rate in a higher loan-to-value band instead.

Enter the property price, your deposit and the rate on the deal you are looking at. The schedule shows how the balance falls each year, and the overpayment fields show what paying extra does to the term and the interest. Leasehold flats can add the monthly service charge to see the full cost.

Many UK deals fix the rate for two or five years. When the deal ends, the FCA explains that you move onto the lender's reversion rate, often its standard variable rate, unless you arrange a new one. This calculator holds one rate for the whole term, so run it again with the reversion rate to see the jump, or use the remortgage calculator to compare deals.

  • Full PITI payment: principal, interest, tax, insurance, PMI and HOA
  • PMI drop-off month at 78% plus the 80% request date
  • Extra monthly, yearly and one-time payments with interest and time saved
  • Yearly and monthly amortization schedule with CSV export
  • Balance chart comparing with and without extra payments
  • Down payment and property tax as a percent or an amount; shareable link
Read the guide: Mortgage Maths: Payments, PMI, Affordability, Refinancing and APR

Updated

How to use the Mortgage Calculator

  1. Enter the Home price and the Down payment, either as a percentage or as an amount (the toggle under the field converts between them).
  2. Set the Interest rate and the Loan term in years.
  3. Fill in property tax (as a percent of the price or a yearly amount), home insurance per year, the PMI rate and any HOA dues.
  4. Optionally add an extra payment every month, once a year, or a one-time amount with the payment number it goes with, and pick the month of your first payment.
  5. Read the total monthly payment and its breakdown, then check the payoff date, PMI drop-off and the amortization schedule. Use Copy results or Share to keep the scenario.

Worked examples

£300,000 house with a 10% deposit

Input

Property £300,000, deposit £30,000, example rate 4.5%, 25-year term, repayment

Output

Mortgage £270,000 at 90% loan-to-value; £1,500.75 a month; £180,224 interest over the term

There is no insurance line in a UK quote. At 90% LTV expect a higher rate than at 75% or 60% LTV, so it is worth testing the rate a bigger deposit would unlock.

Stretching to 35 years

Input

Same £270,000 mortgage at 4.5% over 35 years

Output

£1,277.79 a month; £266,673 interest

The payment falls by about £223 a month, but the interest rises by about £86,000 and the mortgage runs ten years longer, often past retirement. Lenders check the term against your age and income.

Overpaying £200 a month

Input

£270,000 at 4.5% over 25 years with £200 extra every month

Output

Paid off 4 years 10 months sooner; £39,155 less interest

Your deal may let you overpay a set amount each year without an early repayment charge. Check your lender's allowance before you set up a regular overpayment.

Leasehold flat with a service charge

Input

Flat £220,000, deposit £33,000 (15%), 4.75% over 30 years, service charge £150 a month

Output

Mortgage £187,000; £975.48 a month, £1,125.48 with the service charge

Service charge and ground rent are part of what a flat costs to own, and lenders take them into account when they assess affordability. Ask the seller's agent for the last few years of charges.

Background and insight

The principal and interest payment comes from the standard annuity formula M = P × r × (1 + r)^n / ((1 + r)^n − 1), where P is the loan amount, r the annual rate divided by 12 and n the number of monthly payments. Each month the lender charges interest on the balance you still owe, so early payments are mostly interest. On the default 360,000 loan at 6.5%, the first payment of 2,275.44 includes 1,950.00 of interest and only 325.44 of principal.

PMI protects the lender when a conventional loan exceeds 80% of the home's value. The US Homeowners Protection Act requires the servicer to cancel it automatically when the balance is first scheduled to reach 78% of the original value, lets you ask for cancellation at 80% (the lender may want proof the home has not lost value), and ends it at the loan's midpoint in any case. The calculator charges PMI as an annual percentage of the original loan until the balance reaches 78% of the purchase price, and also prints the 80% request date. FHA loans use a separate mortgage insurance premium with different removal rules, so this PMI model fits conventional loans.

Property tax, insurance and HOA dues are entered as today's figures and held flat. In real life they usually rise, and many lenders collect tax and insurance through an escrow account that is re-analysed each year, so treat the escrow part of the payment as a starting estimate.

Common use cases

  • Budgeting before house hunting

    See the full payment including tax, insurance and PMI rather than the lender's headline principal and interest.

  • Checking a Loan Estimate

    Reproduce the projected payments table on a lender's Loan Estimate to make sure the rate and escrow figures add up.

  • Planning extra payments

    Compare a monthly top-up, a yearly bonus payment or a one-off windfall and see which saves the most interest.

  • Timing PMI removal

    Find the month you can ask the servicer to drop PMI, and how much sooner extra payments bring it.

  • Choosing a loan term

    Weigh the lower payment of a 30-year loan against the interest saved on a 15 or 20-year loan.

Tips and limitations

  • Compare deals on the total cost over the fixed period, including the product fee, not on the rate alone.
  • Start looking for a new deal before your fix ends so you do not sit on the reversion rate.
  • Buildings insurance is usually a condition of the mortgage; add it if you want the full monthly outlay.
  • Stamp duty, solicitor fees and the survey are paid up front and are not part of this calculation.

Sources and further reading

  1. Support with your mortgage and interest rates, Financial Conduct Authority. Reversion rates at the end of a deal, early repayment charges, affordability checks and switching with your existing lender.
  2. Financial stability, Bank of England. The Financial Policy Committee limits the number of new mortgages at 4.5 times income or more.

Frequently asked questions

Do UK mortgages have PMI?

No. UK borrowers do not pay private mortgage insurance. Lenders set rates by loan-to-value band, so a 10% deposit usually means a higher rate than a 25% or 40% deposit. Leave mortgage insurance set to none.

What happens when my fixed rate ends?

If you have not arranged a new deal, you move automatically onto your lender's reversion rate, which is often its standard variable rate. The FCA says you should usually be able to switch to a new deal with your existing lender without a new affordability check, unless you borrow more.

How much would my monthly repayment be on a £250,000 mortgage?

Enter a property price and deposit that leave £250,000 borrowed, then your rate and term. At 4.5% over 25 years a £270,000 mortgage is £1,500.75 a month, so £250,000 is a little under £1,390; the calculator gives the exact figure for your rate.

Can I overpay my mortgage without a penalty?

Often up to a limit set by your lender during a fixed or tracker deal. Above it, an early repayment charge (ERC) may apply; the FCA notes it is normally a percentage of the balance and usually falls as the deal nears its end. Some lenders charge no ERC.

Does this include stamp duty?

No. Stamp Duty Land Tax in England and Northern Ireland, Land and Buildings Transaction Tax in Scotland and Land Transaction Tax in Wales are one-off taxes on the purchase. Work them out separately and keep them out of the deposit you enter here.

Is this a repayment or interest-only calculation?

Repayment. Each monthly payment covers the interest and part of the capital, so the balance reaches zero at the end of the term. On an interest-only mortgage the payment is the balance times the rate divided by 12, and you need a separate plan to repay the loan.

Is there an in-depth guide to the Mortgage Calculator?

Yes. “Mortgage Maths: Payments, PMI, Affordability, Refinancing and APR” covers the background, how it works, common pitfalls and worked examples. Read the full guide.