Barbell Plate Calculator
Find which plates to load on each side of the bar for any target weight, with collars and the plates you own, plus the nearest loads when it cannot be exact.
The interactive tool loads here when JavaScript runs.
About this toolWhat is the Barbell Plate Calculator?
The Barbell Plate Calculator tells you which plates to put on each side of the bar for the weight you want to lift. Enter the target, the bar and the collars, and it lists the plates for one side from the heaviest (innermost) to the lightest, with a drawing of the loaded sleeve and the total in the other unit.
It works in kilograms or pounds, with presets for 20 kg, 15 kg and 10 kg bars and 45, 35 and 15 lb bars, and an optional collar weight for competition collars. If you train at home or in a small gym, set blank boxes to "None (only the plates I list)" and enter how many pairs of each plate you own (or type 0 for every size you do not have). The calculator then searches every combination, so it finds 15 + 15 for a 30 kg side when your only pair of 25s cannot be topped up, and it tells you the nearest loads below and above when the exact weight is impossible.
- Plates per side, heaviest first, with a drawing of the sleeve
- kg and lb, with bar presets and a collar weight
- Limited plate inventory with an exact search
- Nearest achievable loads below and above
- Total shown in both units
- Copy result, and a shareable link that keeps your plate counts
Updated
How to use the Barbell Plate Calculator
- Choose kg or lb.
- Enter the target weight, meaning everything on the bar including the bar and collars.
- Pick a bar preset or type the bar weight, and enter each collar's weight (0 for spring clips, 2.5 kg for competition collars).
- If your plates are limited, choose "None (only the plates I list)" under "Plates you have" and enter the pairs you own of each size. With "Unlimited" chosen, a blank box means as many as you need.
- Read the plates for one side, load the same on the other, and copy the result if you want it in your training notes.
Worked examples
Competition bar with collars
Input
147.5 kg, 20 kg bar, 2.5 kg collars, standard plates
Output
Each side 25 + 25 + 10 + 1.25 (61.25 kg)
The empty bar with collars weighs 25 kg, so only 122.5 kg goes on as plates. Forgetting the collars would add a 2.5 kg plate to each side and put 152.5 kg on the bar.
Home gym without small change plates
Input
80 kg on a 20 kg bar; only the plates listed: 1 pair of 25 kg and 2 pairs of 15 kg (0 for every other size)
Output
Each side 15 + 15
Heaviest-first would load the 25 and get stuck needing 5 kg. The search finds two 15s instead.
A weight your plates cannot make
Input
90 kg on a 20 kg bar; only the plates listed: 1 pair each of 25, 2.5 and 1.25 kg and 2 pairs of 15 kg (0 for every other size)
Output
No exact load; nearest 87.5 kg (15 + 15 + 2.5 + 1.25) or 100 kg (25 + 15)
35 kg a side is out of reach with these plates, so you choose between the two nearest loads.
Classic pound loads
Input
225 lb and 315 lb on a 45 lb bar
Output
45 + 45 and 45 + 45 + 45 per side
Two and three "plates" in gym slang mean two or three 45s per side.
Background and insight
The arithmetic is simple: each side carries (target - bar - both collars) / 2. On a 20 kg bar with the 2.5 kg collars the IPF requires in competition, the empty bar weighs 25 kg, so 147.5 kg needs 61.25 kg a side: 25 + 25 + 10 + 1.25. Without collars the same total needs 63.75 kg a side, and a 2.5 kg plate joins the list.
The IPF Technical Rules (2026 edition) list competition discs of 1.25, 2.5, 5, 10, 15, 20 and 25 kg, allow lighter discs from 0.25 kg for record attempts, and require heavier discs innermost with smaller ones in descending order. They fix colours only for the three largest: 25 kg red, 20 kg blue and 15 kg yellow; 10 kg and under may be any colour. Pound gyms usually stock 45, 35, 25, 10, 5 and 2.5 lb plates.
With unlimited plates, picking the heaviest plate that fits, then the next, always finds the load when one exists, because the smallest plate divides every other size, so whatever is left can be filled with smaller plates. A limited inventory breaks that shortcut. With one pair of 25s and two pairs of 15s but no 5s, loading 25 first leaves 5 kg a side that nothing can fill. The calculator records every per-side sum your plates can make and then builds the heaviest-first loading that actually reaches the target.
Common use cases
Loading working sets fast
Get the plates for a percentage of your max or an RPE-based load without mental arithmetic between sets.
Home and garage gyms
Enter the pairs you own to see whether a load is possible and which plates make it.
Meet preparation
Practise with a 20 kg bar and 2.5 kg collars so attempts are loaded the way they will be on the platform.
Buying plates
Try a target with and without a pair of 5s or 1.25s to see which purchase fills the gaps you hit most.
Tips and limitations
- Check the bar. Many gym bars are 20 kg or 45 lb, but technique bars, women's bars and specialty bars differ; the number is often printed on the end cap.
- Plates are only accurate to their tolerance. IPF competition discs must be within 0.25% or 10 g of face value; ordinary gym plates are often less precise.
- Pound and kilogram plates are not interchangeable: a 45 lb plate is about 20.4 kg and a 20 kg plate about 44.1 lb.
- For small jumps without fractional plates, change both sides by the smallest plate you own; the total moves by twice that plate.
- Collars are part of the load. Spring clips weigh little, but competition collars add 5 kg to the bar.
Sources and further reading
- IPF Technical Rule Book (effective 1 March 2026), International Powerlifting Federation. Sections 2.3 and 2.4: disc sizes, colours, loading order, 2.5 kg collars
- NIST Handbook 44 - Current Edition, National Institute of Standards and Technology. Appendix C, General Tables of Units of Measurement: 1 avoirdupois pound = 0.453 592 37 kg exactly
Frequently asked questions
How do I work out the plates for each side of a barbell?
Subtract the bar and both collars from the target and halve it. For 100 kg on a 20 kg bar with no collars that is 40 kg a side, loaded as 25 + 15. Then use the heaviest plates first and fill the rest with smaller ones.
Do collars count towards the weight on the bar?
Yes. In IPF competition each collar weighs 2.5 kg, so a 20 kg bar with collars already weighs 25 kg. Light spring clips are usually ignored.
Why can't I make some weights with the plates I have?
Every total is the empty bar plus twice the sum of one side. If your smallest plate is 2.5 kg, totals move in 5 kg steps; missing sizes leave further gaps. The calculator shows the nearest loads either side when the exact one is impossible.
Which plate goes on first?
The heaviest, innermost, then smaller plates in descending order. The IPF rules require this order on the platform, and it keeps the large plates against the sleeve collar where they belong.
How heavy is a 45 lb plate in kg?
About 20.41 kg (45 x 0.45359237). A 20 kg plate is about 44.09 lb, so a bar loaded with 45s is slightly heavier than the same bar loaded with 20s.
What do the colours of bumper and competition plates mean?
The IPF fixes three: 25 kg red, 20 kg blue and 15 kg yellow. Plates of 10 kg and under may be any colour, so check the number printed on them rather than the colour.
Is there an in-depth guide to the Barbell Plate Calculator?
Yes. “Loading a Barbell, Training by RPE and Timing Intervals” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.