Blood Sugar Converter

Convert blood glucose between mg/dL and mmol/L with the exact 18.0156 factor from glucose's molar mass. A unit converter only; it never interprets readings.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Blood Sugar Converter?

A glucose meter bought in the US shows 100 mg/dL; a UK or Canadian meter shows the same blood as 5.5 mmol/L. Travelers, people reading research from another country, and anyone comparing notes with relatives abroad run into the two scales constantly. Enter a reading in either unit and this converter returns the other, using the exact chemistry-based factor of 18.0156 mg/dL per mmol/L.

To be plain about what this page is: it converts measurement units, nothing more. It does not interpret a reading, flag it as high or low, or give medical advice of any kind, and the targets that matter for you come from your own clinician, who sets them for your situation. The arithmetic here only restates one number in another notation, the way km restates miles.

Readings never leave your browser; the conversion runs entirely on your device with no upload. The worked steps show the molar-mass arithmetic behind the factor, the report bar beneath the result exports a CSV or PDF, and the share link reopens the page with the same value entered.

  • Two-way mg/dL and mmol/L conversion from a single input
  • Exact factor derived on the page: 180.156 g/mol gives 18.0156 mg/dL per mmol/L
  • Worked molar-mass steps shown with the result
  • Explicit scope note: unit conversion only, never interpretation
  • Report bar export to CSV or PDF and a link that reloads your reading
Read the guide: Unit Conversion Factors: Exact Definitions, Gallons and Temperature Offsets

Updated

How to use the Blood Sugar Converter

  1. Type the glucose reading from your meter, lab report or an article.
  2. Choose its unit, mg/dL or mmol/L; the other unit appears immediately.
  3. Open the steps to see the 180.156 g/mol molar mass turned into the 18.0156 factor.
  4. Export the conversion as CSV or PDF from the report bar if you keep records in one unit.
  5. Copy the share link to send the exact conversion to someone using the other scale.

Worked examples

US meter reading in mmol/L

Input

100 mg/dL

Output

5.55 mmol/L

100 ÷ 18.0156 = 5.5507, so a US reading of 100 corresponds to 5.55 on a UK, Canadian or Australian meter. Both numbers describe the same concentration of glucose.

The paired figures in published tables

Input

7.0 mmol/L

Output

126.1 mg/dL

7.0 × 18.0156 = 126.109. Tables that print 126 mg/dL next to 7.0 mmol/L are rounding this arithmetic; the two columns are one measurement in two notations.

Traveling with a mg/dL meter

Input

180 mg/dL

Output

9.99 mmol/L

180 ÷ 18.0156 = 9.9914. A convenient near-coincidence for mental math: because the factor is almost exactly 18, multiples of 18 mg/dL land close to whole mmol/L values.

UK lab figure for a US reader

Input

5.5 mmol/L

Output

99.09 mg/dL

5.5 × 18.0156 = 99.086. Rounding to 99, or loosely to 100, is why quick-reference charts treat 5.5 and 100 as the same point on the two scales.

Background and insight

The two units reflect two ways of counting the same dissolved glucose. mg/dL counts mass per volume: milligrams of glucose in a tenth of a liter of blood. mmol/L counts molecules, in moles, per liter, the SI-aligned convention for laboratory chemistry. The bridge is glucose's molar mass: C₆H₁₂O₆ weighs 180.156 g/mol, so one millimole per liter is 180.156 mg per liter, which is 18.0156 mg per deciliter. Dividing a mg/dL reading by 18.0156, or multiplying a mmol/L reading by it, is the entire conversion.

Which unit you grew up with is geography. The US uses mg/dL, as do Japan in most clinical practice and parts of Germany, where usage historically split by region. The UK, Canada, Australia and most of Europe report in mmol/L. Meters, test strips, lab reports and diabetes literature follow their home market, so the same person can own two devices that will never show the same number for the same drop of blood.

The split is why published figures come in pairs: a table that lists 126 mg/dL will show 7.0 mmol/L beside it. As pure arithmetic, 7.0 × 18.0156 = 126.1, so the familiar pairing is a rounded correspondence between the two scales, not two different measurements. What any such number means for a particular person is a clinical question this page does not answer.

Common use cases

  • Traveling between unit regions

    Keep a log in one unit while using a meter, clinic or pharmacy that reports in the other.

  • Reading international research

    Restate figures from papers and guidelines written in mmol/L for a mg/dL habit, or the reverse.

  • Family across borders

    Compare readings with relatives whose meters use the other scale without mental arithmetic errors.

  • Records and spreadsheets

    Normalize a mixed history of lab reports and meter exports into a single unit column.

Tips and limitations

  • This page converts units only. It does not say whether a value is normal, safe or concerning; discuss readings and the targets that apply to you with your clinician.
  • Dividing by 18 instead of 18.0156 is accurate to better than 0.1%, far finer than a home meter can measure, so the mental shortcut is safe for everyday use.
  • Meters are usually locked to the unit of the market they were sold in; check the manual before assuming a settings menu can switch scales.
  • HbA1c is a different measurement with different units (% or mmol/mol) and does not convert with the 18.0156 factor; this tool is for glucose concentration only.
  • When sharing a reading across countries, name the unit explicitly. A bare 6.1 and a bare 110 can both be plausible readings, which is exactly how transcription mix-ups happen.

Sources and further reading

  1. Blood sugar level, Wikipedia. The mg/dL and mmol/L conventions and their use by country
  2. Understanding Diabetes Diagnosis, American Diabetes Association. Glucose figures as reported in mg/dL in US practice
  3. NIST Special Publication 811: Guide for the Use of the International System of Units, NIST. The mole and the liter in SI-based concentration units

Frequently asked questions

How do I convert mg/dL to mmol/L?

Divide by 18.0156, so 90 mg/dL is 5.00 mmol/L. To go the other way, multiply a mmol/L figure by 18.0156. The converter does both and shows the arithmetic.

Why is the blood sugar conversion factor 18?

Glucose, C₆H₁₂O₆, has a molar mass of 180.156 g/mol. One millimole per liter is therefore 180.156 mg per liter, and since a deciliter is a tenth of a liter, that is 18.0156 mg/dL. The factor is chemistry, not convention.

Which countries measure blood sugar in mmol/L?

The UK, Canada, Australia and most of Europe report glucose in mmol/L. The US uses mg/dL, as does most clinical practice in Japan, and German usage is split, with both units in circulation.

Is 5.5 mmol/L the same as 100 mg/dL?

Almost: 5.5 mmol/L is 99.09 mg/dL, and 100 mg/dL is 5.55 mmol/L. Quick-reference charts round the pair together; the converter gives the exact figures when the difference matters for record keeping.

Can I switch the unit on my glucose meter?

Often not. Many meters are fixed to their market's unit at the factory, partly to prevent dangerous misreadings, though some models do have a setting. Check your device manual; when the meter cannot switch, convert the logged numbers instead.

Does this tool tell me whether my reading is normal?

No, and deliberately so. It restates a number in the other unit and nothing else. Reference ranges depend on when you tested, your health and your treatment, so interpretation belongs with your clinician, not a unit converter.

Does HbA1c convert with the same factor?

No. HbA1c is reported in percent or mmol/mol and measures glycated hemoglobin, not glucose concentration, so the 18.0156 factor does not apply to it at all. Converting between A1c conventions is a separate calculation.

Is there an in-depth guide to the Blood Sugar Converter?

Yes. “Unit Conversion Factors: Exact Definitions, Gallons and Temperature Offsets” covers the background, how it works, common pitfalls and worked examples. Read the full guide.