Australia version. Uses the Australian 7-point scale (HD 7, D 6, CR 5, P 4, fail 0) weighted by credit points, with marks converted at HD 85, D 75, CR 65 and P 50. US version
GPA Calculator (Australia, 7-Point Scale)
Calculate your university GPA on the Australian 7-point scale from HD, D, CR, P and fail grades or marks, weighted by credit points, with a target GPA planner.
The interactive tool loads here when JavaScript runs.
About this toolWhat is the GPA Calculator?
Most Australian universities report a GPA on a 7-point scale: High Distinction 7, Distinction 6, Credit 5, Pass 4 and Fail 0, weighted by each subject's credit points. UTS, for example, moved to this scale in 2020 and recalculated earlier GPAs on it.
Type the grade for each subject (HD, D, CR, P or F) or the final mark out of 100, and its credit points. Marks convert at the common bands HD 85 to 100, D 75 to 84, CR 65 to 74, P 50 to 64 and fail below 50. Some universities use other bands or give a fail more than 0 points, so check your handbook.
GPA is not the same as WAM. A weighted average mark averages the marks themselves, so two students with the same GPA can have different WAMs. Honours and scholarship committees often ask for one or the other.
- Letter grades or percentages with credits per course
- Unweighted and weighted GPA with editable honors and AP/IB bonuses
- Three US grading scales (4.0 with plus/minus, 4.3, whole letters), plus the Philippine 1.00 to 5.00 GWA, the Nigerian NUC 5-point CGPA and the Pakistani HEC 4.0 scale with standing
- Cumulative GPA from prior GPA and credits
- Target GPA planner
- Pass/fail and withdrawn courses listed but not averaged
Updated
How to use the GPA Calculator
- For each course, type the grade (letter or percentage), the credits or units, and choose Regular, Honors or AP/IB. Course names are optional.
- Choose the grading scale your school uses and adjust the honors and AP bonuses if they differ from +0.5 and +1.0.
- To get a cumulative GPA, enter your GPA so far and the number of credits it covers.
- Read the term, weighted and cumulative GPAs and the grade points table.
- In the planner, enter your target GPA and the credits you have left to see the average you need.
Worked examples
A semester of four 6-credit-point subjects
Input
Accounting HD, Economics D, Statistics 68, Law P, 6 credit points each
Output
GPA 5.50
The 68 converts to a Credit (5). (7 + 6 + 5 + 4) × 6 ÷ 24 = 5.50.
One fail in a semester
Input
HD, F, CR and a mark of 84, 6 credit points each
Output
GPA 4.50
A fail counts 0 points over its credit points. The 84 is a Distinction; one more mark would have made it an HD.
Reaching a 6.0 for honours
Input
Current GPA 5.25 over 96 credit points, 96 still to complete, target 6.0
Output
You need 6.75 over the remaining 96 credit points
Halfway through a degree, lifting a GPA by 0.75 means averaging between a Distinction and a High Distinction from here on.
Background and insight
A GPA is a credit-weighted average. Each grade is turned into grade points (A = 4.0, A- = 3.7, B+ = 3.3, B = 3.0, B- = 2.7, C+ = 2.3, C = 2.0, C- = 1.7, D+ = 1.3, D = 1.0, D- = 0.7, F = 0 on the most common US scale), multiplied by the course credits to give quality points, and the total quality points are divided by the total credits. A 4-credit B+ therefore counts a third more than a 3-credit B+.
Schools do not all use the same table. Some give A+ 4.3, some drop plus and minus grades altogether, and percentage cut-offs vary; the College Board's own conversion chart, for example, uses whole letters only. The scale menu covers the three variants you are most likely to meet, and you should check your handbook for anything unusual.
Weighted GPAs reward harder courses by adding a bonus to their points, typically +0.5 for honors and +1.0 for AP or IB, which is why weighted GPAs can exceed 4.0. Both bonuses are editable because high schools set their own. Many colleges recalculate applicants' GPAs on their own basis, often stripping the weighting, so the unweighted figure is usually the one to compare across schools.
Common use cases
End-of-term check
Work out the term GPA as soon as grades are posted, before the transcript updates.
College applications
See both the weighted and unweighted GPA so you can report the one an application asks for.
Scholarship and honors thresholds
Find out what grades keep you above a 3.0 or 3.5 requirement next term.
Academic probation recovery
Use the planner to see how many credits at what average it takes to climb back over 2.0.
Tips and limitations
- Use credit points from your transcript; subjects are often 6 or 12 credit points.
- Withdrawals before the census date and satisfactory or ungraded passes are left out; a withdrawn fail counts as 0 at UTS and many other universities.
- If your university uses a 4-point scale, switch the scale to one of the 4.0 options.
Sources and further reading
- Grade point average and weighted average mark, University of Technology Sydney. 7-point scale from 2020, GPA and WAM formulas.
- Rules made by the Vice-Chancellor: grade descriptors, University of Technology Sydney. Mark ranges: HD 85-100, D 75-84, C 65-74, P 50-64, fail 0-49.
Frequently asked questions
How is GPA calculated at Australian universities?
Multiply each subject's grade point by its credit points, add them up, and divide by the total credit points attempted. UTS publishes the formula as GPA = Σ(grade point × credit points) ÷ total credit points enrolled.
What is a High Distinction worth?
7 on the 7-point scale. A Distinction is 6, a Credit 5 and a Pass 4. On older 4-point scales an HD was 4.
What is the difference between GPA and WAM?
GPA averages grade points (7, 6, 5, 4, 0); WAM averages the marks out of 100, weighted by credit points. A mark of 85 and one of 99 both count as 7 in a GPA but very differently in a WAM.
What GPA do I need for honours?
Each university and faculty sets its own entry requirement, often around a Distinction average. Put the requirement in the target box to see what you need for the rest of your degree.
Does a fail count as zero?
At many universities yes, including UTS. Some give a fail 1 or more points, so check your handbook if your transcript shows a different GPA.
Is there an in-depth guide to the GPA Calculator?
Yes. “GPA and Final Grades: The Weighted Averages Behind Your Transcript” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.