Canada version. Board feet (FBM) as Canadian mills and hardwood dealers quote them, CSA O141 metric sizes such as 38 x 140 mm, Mfbm and cubic metres, and prices in CA$. US version

Board Foot Calculator (Canada)

Board feet (FBM) for a Canadian lumber list, from 2x6 framing to 4/4 hardwood, with waste, price per board foot in CA$, Mfbm and nominal cubic metres.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Board Foot Calculator?

Canada, like the US, still measures wood in board feet. Softwood lumber is traded in thousand board feet (Mfbm, sometimes written MBF or FBM for foot board measure), hardwood dealers price rough boards per board foot, and building plans list 2x6 and 2x10 in the same nominal sizes as the US. A board foot is 1 in x 12 in x 1 ft of nominal size, so a 2x6 that is 12 ft long is 12 board feet even though it actually measures 38 x 140 mm.

This version starts with a small framing package: 40 pieces of 2x6 at 12 ft and 20 pieces of 2x10 at 16 ft. That is 1,013 board feet, or 1,115 with 10% extra, about 1.1 Mfbm. Price it per board foot in CA$ to compare with the per-piece prices at the yard.

The cubic metre figure is nominal: 1,000 board feet is 2.36 m³ of nominal size, but the same 1,000 board feet of 2x4 dressed to 38 x 89 mm holds only 1.55 m³ of wood. Keep that in mind when a supplier or a statistic quotes cubic metres.

  • Board list with quantity, quarter thickness, width and feet-inch lengths
  • NHLA option to tally stock under 1 in as 1 in
  • Waste allowance, cost per board foot and seven currency symbols
  • Cubic metres, cubic feet and linear feet, plus a linear foot to board foot converter
  • Metric input in millimetres and metres; copy and share link
Read the guide: How to Calculate Board Feet: Hardwood, Dimension Lumber and Metric

Updated

How to use the Board Foot Calculator

  1. Choose imperial or metric. In imperial mode, type thickness as quarters (4/4, 8/4) or inches, width in inches and length in feet or feet and inches.
  2. Add one line for each board size and set the quantity. The quick-add buttons drop in common dimension sizes such as 2x4, 2x6 or 4x4.
  3. Enter a waste percentage. Rough hardwood often needs 15 to 30% for defects and offcuts; clear, dressed stock less.
  4. Enter the price per board foot to see the cost of the quantity you need to buy.
  5. Use the converter to turn linear feet of a given section into board feet, or the reverse, then copy the list or share a link.

Worked examples

Framing package

Input

40 x 2x6 x 12 ft and 20 x 2x10 x 16 ft, 10% waste

Output

1,013 BF; 1,115 BF to buy; 2.39 m³ nominal

A 2x6 x 12 is 12 BF and a 2x10 x 16 is 26.7 BF, so the 2x10s are more than half the package.

A unit of 2x4 x 8 studs

Input

100 x 2x4 x 8 ft

Output

533.3 BF; 1.26 m³ nominal

Each stud is 5.33 BF. Comparing a per-piece price with a per-Mfbm quote needs exactly this conversion.

Hardwood for a project

Input

12 boards 4/4 x 6 in x 8 ft and 4 boards 8/4 x 8 in x 8 ft, 20% waste

Output

90.7 BF; 108.8 BF to buy

Rough hardwood loses more to defects and planing, so allow 20% or more.

Background and insight

The board foot formula is thickness in inches times width in inches times length in feet, divided by 12. A 2x4 eight feet long is 2 x 4 x 8 / 12 = 5-1/3 board feet, because softwood dimension lumber is tallied on its nominal size even though it is dressed to 1-1/2 x 3-1/2 in under the American Softwood Lumber Standard (NIST PS 20). Hardwood is different: it is sold rough, by quarter-inch thickness, so 4/4 stock is about one inch thick and 8/4 is about two. The National Hardwood Lumber Association rules also tally boards thinner than one inch as one inch, which the calculator offers as an option.

Because one inch is exactly 25.4 mm, one board foot is exactly 0.002359737 cubic metres and one cubic metre is 423.776 board feet. Timber sold by the cubic metre can therefore be compared directly with US pricing. The older Hoppus foot used for round logs in Britain and parts of Asia is a different measure (about 1.27 true cubic feet) and is not used here.

Common use cases

  • Buying rough hardwood

    Turn a project cut list into board feet with a defect allowance before visiting a hardwood dealer.

  • Checking a sawmill tally

    Re-add a mill ticket line by line to confirm the volume you are paying for.

  • Comparing by-the-foot and by-volume prices

    Convert a per-linear-foot price for a given section into a price per board foot or per cubic metre.

  • Estimating sawlog yield

    Total the boards you expect from a log or a stack of slabs to compare against a log scale.

Tips and limitations

  • Canadian dimension lumber dressed sizes: 2x4 is 38 x 89 mm, 2x6 38 x 140 mm, 2x8 38 x 184 mm, 2x10 38 x 235 mm and 2x12 38 x 286 mm.
  • Board feet always use the nominal size for softwood dimension lumber, but the actual thickness in quarters (4/4, 8/4) for rough hardwood.
  • Switch to metric to enter boards in millimetres and metres; the tool converts and still reports board feet.

Sources and further reading

  1. Lumber, Canadian Wood Council. Canadian dimension lumber sizes, nominal and metric (38 x 89 mm for a 2x4).
  2. Lumber production, shipments, and stocks by species, monthly (table 16-10-0017-01), Statistics Canada

Frequently asked questions

What is FBM in lumber?

Foot board measure: the board foot, 144 cubic inches of nominal size. Mfbm or MBF means a thousand board feet, the unit Canadian softwood lumber is traded in.

How many board feet are in a 2x6 x 12?

12 board feet: 2 x 6 x 12 / 12. A 2x4 x 8 is 5.33 and a 2x10 x 16 is 26.67.

How do I convert board feet to cubic metres?

Multiply by 0.00236 for nominal volume: 1,000 BF is 2.36 m³. For dressed lumber the actual volume is smaller, about 1.55 m³ per 1,000 BF of 2x4.

Is a 2x4 really 2 by 4 inches in Canada?

No. Under the Canadian lumber standard a dry, dressed 2x4 is 1-1/2 x 3-1/2 in, or 38 x 89 mm. Board feet still use the nominal 2 x 4.

How do I price lumber per board foot in Canadian dollars?

Pick C$ in the currency box and enter the price per board foot. To compare with a per-piece price, divide the piece price by its board feet: a 2x6 x 12 at C$18 is C$1.50 per BF.

Is there an in-depth guide to the Board Foot Calculator?

Yes. “How to Calculate Board Feet: Hardwood, Dimension Lumber and Metric” covers the background, how it works, common pitfalls and worked examples. Read the full guide.