United Kingdom version. Metric throughout: tile sizes in mm, areas in m², boxes by the m² printed on UK packs, grout in kg and prices in pounds. US version

Tile Calculator (UK)

Work out tiles per m² for bathroom walls and floors in mm sizes, with 2 to 3 mm joints, boxes by m² coverage, grout in kg and a cost in pounds.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Tile Calculator?

UK tile shops label every box with the square metres it covers, and tiles are sized in millimetres: 300 x 600 for bathroom walls, 600 x 600 porcelain for floors, 75 x 300 metro for splashbacks. This version works in those units, so you can enter the m² from the box and get a whole number of boxes.

A family bathroom with 9 m² of wall to tile in 300 x 600 mm tiles at a 2 mm joint needs 55 tiles with 10% extra. At 1.08 m² a box (six tiles), that is 10 boxes and about 1.4 kg of grout.

Powered cutting of silica-containing materials makes fine dust. For cut-off saws on paving and blocks, HSE guidance is water suppression or on-tool extraction plus respiratory protection, and the same care makes sense when you cut porcelain or stone with a powered cutter.

  • Grout joint counted in every tile, not just the tile face
  • Layout presets for straight, offset, diagonal and herringbone waste, all editable
  • Boxes from tiles per box or coverage per box, with a cost estimate
  • Grout weight in kg and lb from the published manufacturer formula
  • Imperial and metric with automatic conversion; copy and share link
Read the guide: Estimating Concrete, Flooring, Tile and Gravel Without Running Short

Updated

How to use the Tile Calculator

  1. Keep the units on metric. Enter the wall or floor in metres, or switch to "I know the area" and type the m².
  2. Subtract the bath, shower tray, vanity unit, windows and doors as openings.
  3. Enter the tile size in mm and the joint: 2 to 3 mm suits rectified porcelain, wider for handmade or rustic tiles.
  4. Set the box as coverage per box and type the m² from the label; add the price per box in pounds.

Worked examples

Bathroom walls in 300 x 600 mm tiles

Input

9.0 m² of wall, 600 x 300 mm, 2 mm joint, 10% waste, boxes of 1.08 m²

Output

55 tiles (49.5 exact); 10 boxes; about 1.4 kg grout

A box of six 300 x 600 tiles covers 1.08 m². Ten boxes leave a few spare for later repairs, which matters because shades vary between batches.

Small en-suite floor in 600 x 600 porcelain

Input

2.4 x 1.8 m, 600 x 600 mm, 3 mm joint, 10% waste, boxes of 1.44 m²

Output

14 tiles (11.9 exact); 4 boxes; about 0.7 kg grout

Large tiles in a small room waste more in cuts than the percentage suggests. Lay them out dry first to see where the cut pieces fall.

Herringbone kitchen floor

Input

4.2 x 3.6 m, 600 x 150 mm planks, 2 mm joint, 15% waste, boxes of 1.08 m²

Output

191 tiles (165.2 exact); 16 boxes; about 4.2 kg grout

Herringbone needs cuts along every edge, so 15% is a sensible floor. Narrow planks also use more grout per m² than large-format tiles.

Background and insight

Each tile occupies its own size plus one joint in each direction. A 12 inch tile with a 1/8 inch joint takes up 12.125 x 12.125 inches, about 2% more than the tile, so a calculator that ignores joints overstates the count for large tiles and is close enough only for very small joints. The difference grows quickly with mosaic and small subway tiles, where the joint is a larger share of each piece.

Waste comes from cuts at the edges. A straight lay wastes mainly the offcuts along two walls. Diagonal and herringbone patterns cut nearly every edge piece at an angle, and the triangles left over are rarely reusable, so installers plan 15 to 20%. Large-format tiles also waste more because a single bad cut costs a big piece. Keep a few spare tiles after the job; matching the dye lot years later is often impossible.

The grout figure comes from (A + B) / (A x B) x C x D x density, with tile length A, width B, tile thickness C and joint width D in millimetres and a density around 1.6 kg per litre for cement grout. It gives kilograms per square metre of floor.

Common use cases

  • Bathroom and kitchen floors

    Subtract the tub, vanity or cabinet footprint and get a box count to order before demolition starts.

  • Shower and backsplash walls

    Enter each wall as a length by height, subtract the window or niche, and use a small tile with its real joint.

  • Comparing tile options

    Change tile size and price per box to see how a larger format or different pattern changes the order and total cost.

  • Ordering grout with the tile

    Use the grout weight to choose between a small and large bag so the job is not held up halfway.

Tips and limitations

  • Tile over a stable, flat base: plasterboard behind a shower is usually replaced with cement or foam backer board and tanked first.
  • Keep the batch number from the box label; buying more later from a different batch can give a visible shade change.
  • Grout and adhesive coverage on UK bags is quoted per m² for a given tile and joint size, so check the bag against this estimate.

Sources and further reading

  1. Construction dust: Cutting paving blocks kerbs and flags, Health and Safety Executive. Water suppression or H or M class on-tool extraction, plus RPE with a protection factor of 20, when cutting with a powered saw.
  2. Manual handling at work, Health and Safety Executive. Large-format tiles and adhesive bags are heavy to carry.

Frequently asked questions

How many 600 x 600 tiles are in a square metre?

About 2.78 tiles laid tight, or 2.75 with a 3 mm joint. Each tile covers 0.36 m², so most UK boxes hold four tiles (1.44 m²) or three (1.08 m²).

How many boxes of tiles do I need for a bathroom?

Work out the wall and floor area separately in m², subtract the bath, tray and doors, add 10% (15% for patterns), and divide by the m² per box on the label. Round up to whole boxes.

What grout joint should I use for porcelain tiles in the UK?

Rectified porcelain is often laid with narrow joints of about 2 to 3 mm; non-rectified tiles and natural stone usually need wider ones. The tile maker states a minimum joint, and the British Standard for tiling is BS 5385.

Do I need to waterproof before tiling a shower?

Tiles and grout are not waterproof on their own. Shower walls and floors are normally tanked with a membrane or liquid tanking kit before tiling, and plasterboard is replaced with a water-resistant backer board in the wet zone.

Is cutting porcelain tiles a dust risk?

It can be. Powered cutting of stone and concrete products releases respirable crystalline silica. For cut-off saws HSE asks for water suppression or on-tool extraction plus respiratory protection with an assigned protection factor of 20, such as an FFP3 mask, and a manual score-and-snap cutter avoids most dust on straight cuts.

Is there an in-depth guide to the Tile Calculator?

Yes. “Estimating Concrete, Flooring, Tile and Gravel Without Running Short” covers the background, how it works, common pitfalls and worked examples. Read the full guide.