India version. Room sizes in feet and sq ft as Indian tile shops quote them, mm tile sizes entered in inches (600 mm = 23.62 in), boxes by sq ft, and prices in ₹. US version

Tile Calculator: Tiles and Boxes for Sq Ft (India)

How many tiles and boxes for a room in sq ft with 600 x 600 mm (2x2) vitrified tiles, 300 x 450 wall tiles or large slabs, with grout and the cost in rupees.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Tile Calculator?

Indian tile shops sell by the box and quote coverage in square feet, while the tiles themselves are metric: 600 x 600 mm vitrified tiles (sold as "2x2"), 800 x 800, 600 x 1200 and large 800 x 1600 slabs for floors, and 300 x 450 or 300 x 600 for kitchen and bathroom dado. This version takes the room in feet and the tile in inches, so enter 600 mm as 23.62 in and 300 mm as 11.81 in.

A 15 x 12 ft living room in 600 x 600 mm tiles with a 2 mm joint and 10% waste needs 51 tiles. A box of four 600 x 600 tiles covers 1.44 m², which is 15.5 sq ft, so that is 13 boxes.

A "2x2" tile is not 2 ft. It is 600 mm, which is 23.62 in, about 2% smaller each way. Using 24 in in the calculator would under-count a large floor.

  • Grout joint counted in every tile, not just the tile face
  • Layout presets for straight, offset, diagonal and herringbone waste, all editable
  • Boxes from tiles per box or coverage per box, with a cost estimate
  • Grout weight in kg and lb from the published manufacturer formula
  • Imperial and metric with automatic conversion; copy and share link
Read the guide: Estimating Concrete, Flooring, Tile and Gravel Without Running Short

Updated

How to use the Tile Calculator

  1. Keep units on imperial and enter the room in feet.
  2. Enter the tile size in inches: 600 mm = 23.62, 800 mm = 31.5, 300 mm = 11.81, 450 mm = 17.72.
  3. Set the joint: 2 mm is 0.08 in; use the spacer size your mason will use.
  4. Set the box by coverage in sq ft or by tiles per box from the shop, and the price per box in ₹.

Worked examples

Living room in 600 x 600 vitrified tiles

Input

15 x 12 ft, 23.62 x 23.62 in, 2 mm (0.08 in) joint, 10% waste, 15.5 sq ft per box

Output

51 tiles (46.1 exact); 13 boxes; about 1.8 kg grout

Add the skirting separately: the room perimeter times the skirting height, less door openings, usually cut from the same tiles.

Kitchen dado in 300 x 450 wall tiles

Input

60 sq ft of wall, 17.72 x 11.81 in, 2 mm joint, 10% waste, 6 tiles per box

Output

45 tiles (40.8 exact); 8 boxes; about 1.0 kg grout

Dado above the counter is usually tiled to about 2 ft; measure each wall and subtract windows.

Large 800 x 1600 slabs in a hall

Input

20 x 15 ft, 31.5 x 63 in, 2 mm joint, 10% waste, 2 tiles per box

Output

24 tiles (21.7 exact); 12 boxes; about 1.7 kg grout

Large slabs waste more at walls; 10% is a minimum in small rooms. They also need a flat base and suction-cup handling.

Background and insight

Each tile occupies its own size plus one joint in each direction. A 12 inch tile with a 1/8 inch joint takes up 12.125 x 12.125 inches, about 2% more than the tile, so a calculator that ignores joints overstates the count for large tiles and is close enough only for very small joints. The difference grows quickly with mosaic and small subway tiles, where the joint is a larger share of each piece.

Waste comes from cuts at the edges. A straight lay wastes mainly the offcuts along two walls. Diagonal and herringbone patterns cut nearly every edge piece at an angle, and the triangles left over are rarely reusable, so installers plan 15 to 20%. Large-format tiles also waste more because a single bad cut costs a big piece. Keep a few spare tiles after the job; matching the dye lot years later is often impossible.

The grout figure comes from (A + B) / (A x B) x C x D x density, with tile length A, width B, tile thickness C and joint width D in millimetres and a density around 1.6 kg per litre for cement grout. It gives kilograms per square metre of floor.

Common use cases

  • Bathroom and kitchen floors

    Subtract the tub, vanity or cabinet footprint and get a box count to order before demolition starts.

  • Shower and backsplash walls

    Enter each wall as a length by height, subtract the window or niche, and use a small tile with its real joint.

  • Comparing tile options

    Change tile size and price per box to see how a larger format or different pattern changes the order and total cost.

  • Ordering grout with the tile

    Use the grout weight to choose between a small and large bag so the job is not held up halfway.

Tips and limitations

  • Buy all boxes from one batch and check the shade and size code on each box; mixing batches shows in daylight.
  • Keep a few spare tiles after the job; a matching tile is hard to find later.
  • Use epoxy grout in kitchens and bathrooms where staining is a concern; it costs more per kg than cement grout.

Sources and further reading

  1. Product manual for pressed ceramic tiles according to IS 15622:2017, Bureau of Indian Standards. The current edition of the standard, used for BIS certification of tiles.
  2. IS 15622:2006 Pressed ceramic tiles: specification (earlier edition, superseded by IS 15622:2017), Bureau of Indian Standards (via Public.Resource.Org)

Frequently asked questions

How many 2x2 tiles are needed for 100 sq ft?

A 600 x 600 mm tile covers 3.875 sq ft, so about 26 tiles laid tight. With a 2 mm joint and 10% extra the calculator gives 29 tiles, which is 8 boxes of four.

How many sq ft are in a box of 600 x 600 tiles?

A box of four covers 1.44 m², which is 15.5 sq ft. Some brands pack three to a box (11.6 sq ft); the coverage is printed on the box.

What is the actual size of a 2x2 tile?

600 x 600 mm, which is 23.62 x 23.62 in. It is close to 2 ft but slightly smaller, so a large floor calculated with 24 in tiles comes out a few tiles short.

How much extra tile should I buy?

About 10% for straight laying, 15% for diagonal, and more for small rooms with large tiles, plus tiles for skirting. Breakage in transport also happens, so check boxes on delivery.

Which standard covers ceramic and vitrified tiles in India?

IS 15622:2017 is the BIS standard for pressed ceramic tiles, grouped by water absorption; vitrified tiles fall in the lowest absorption groups. Look for the standard mark and grade on the box.

Is there an in-depth guide to the Tile Calculator?

Yes. “Estimating Concrete, Flooring, Tile and Gravel Without Running Short” covers the background, how it works, common pitfalls and worked examples. Read the full guide.