Feet to Meters Converter
Change feet into meters with the exact 0.3048 factor written into every step, from ceiling heights to cruise altitude, with CSV, PDF and share-link export.
The interactive tool loads here when JavaScript runs.
About this toolWhat is the Feet to Meters Converter?
Feet and meters are the units of built and flown things: an 8 foot ceiling, a 35,000 foot cruise altitude, a 50 meter setback on a site plan. This converter handles that single pair both ways, and accepts feet with inches attached, so 6 ft 2 in converts as one input instead of forcing you to do the twelfths yourself.
The factor never wobbles because it is a definition: one international foot is exactly 0.3048 m, twelve inches of 25.4 mm each. Multiply 35,000 ft by it and you get 10,668 m on the nose, with no rounding anywhere in the chain; any rounding in the display is a choice you make, not an error the tool introduced.
Your figures stay on your machine, since the page itself performs the multiplication with nothing sent to any server. The working panel writes out the exact 0.3048 step applied to your number, and the report bar below gives you the result as a CSV or PDF or as a link that opens the converter with your value in place.
- Single-pair feet-meters converter with feet-and-inches input
- Exact international foot of 0.3048 m behind every result
- Step panel that shows the multiplication or division as applied to your number
- Rounding presets for construction, aviation and everyday use
- All computed in the browser, with CSV, PDF and share-link export in the report bar
Updated
How to use the Feet to Meters Converter
- Enter a length in feet, either as a decimal like 12.5 or as feet and inches like 6 ft 2 in.
- Read the meters instantly, or reverse the direction to turn meters into feet.
- Open the steps to see the exact multiplication by 0.3048 with your figure substituted in.
- Set the rounding to suit the job: centimeters for rooms, whole meters for altitudes.
- Export or share from the report bar: CSV, PDF, or a link that carries your input.
Worked examples
Cruise altitude
Input
35,000 ft
Output
10,668 m
35,000 x 0.3048 = 10,668 m with no remainder, a rare case where a round figure in one unit lands on a round figure in the other. The common "about 10.7 km" is this number rounded.
A tall person
Input
6 ft
Output
1.8288 m
6 x 0.3048 = 1.8288 m exactly, so "six feet" and "1.83 m" describe the same height. Adding inches works the same way: 6 ft 2 in is 74 in, which is 1.8796 m.
Ceiling height
Input
8 ft
Output
2.4384 m
The standard North American ceiling converts to 2.4384 m. Metric markets frame to 2.4 m instead, which is why imported cabinetry and wall panels can run 38 mm proud or shy.
Sanity-checking the mile
Input
5,280 ft
Output
1,609.344 m
A mile is 5,280 ft, and multiplying by 0.3048 gives 1,609.344 m, the defined length of the mile. When two definitions agree like this, the factor chain is consistent.
Background and insight
Aviation is the foot's global stronghold. Altitudes and flight levels are assigned in feet across nearly all of the world's airspace, whatever units the country beneath uses for everything else, with China the main exception in assigning metric cruising levels. The result is a standing conversion task: FL350 means 35,000 ft, which a metric chart, a terrain database or a drone regulation will state as 10,668 m, and controllers on metric-feet boundaries carry conversion tables for exactly this pair.
Construction splits along the same line. US and some Canadian drawings dimension in feet and inches while most of the world details in millimeters and site-plans in meters, so a specification that crosses a border has to restate every ceiling height, span and setback. The stakes are real: an "8 foot" ceiling is 2.4384 m, and a plan that rounds it to 2.4 m has quietly removed 38 mm, about the thickness of a stud wall plate.
The tidy 0.3048 is younger than it looks. National feet disagreed by tiny amounts until the 1959 international agreement set the yard at 0.9144 m, making the foot exactly three tenths of a meter plus 1.6 percent. That last ratio is worth memorizing, because 0.3 x 1.016 = 0.3048 exactly, and it turns feet-to-meters into clean mental arithmetic: take three tenths, then add 1.6 percent.
Common use cases
Plans across borders
Restate room dimensions, spans and setbacks between feet-and-inch drawings and metric site plans.
Aviation and drones
Convert altitudes, ceiling limits and airspace floors between the feet used in flight and the meters in local rules.
Real estate abroad
Make sense of ceiling heights and frontages when listings quote the unit your intuition was not trained on.
Hiking and climbing
Compare summit elevations and trail gains between feet-based US maps and metric guidebooks.
Tips and limitations
- The clean mental route: take 30 percent of the feet, then add 1.6 percent, because 0.3 x 1.016 is exactly 0.3048. For 1,000 ft: 300 plus 4.8 gives 304.8 m, which is the exact answer.
- Going meters to feet, multiply by 3.28, or by 3 and add a tenth of the original: 10 m is roughly 30 + 3 = 33 ft against an exact 32.81.
- Convert feet-and-inches as total inches or let the tool take the pair; converting the feet and inches separately and adding rounded pieces stacks two rounding errors.
- For building work, keep results to the millimeter and round only on the final dimension; 2.44 m and 2.4384 m differ by more than a plasterboard thickness.
- Elevation figures on older US maps may be in survey feet, which differ from international feet by 2 parts per million; it changes nothing below the scale of mountains.
Sources and further reading
- NIST Special Publication 811: Guide for the Use of the International System of Units, National Institute of Standards and Technology. The exact foot-meter factor in Appendix B
- The International System of Units (SI Brochure), BIPM. The meter defined by the speed of light
- Foot (unit), Wikipedia. The international foot and its 1959 adoption
Frequently asked questions
What is 6 feet in meters?
6 ft is exactly 1.8288 m, from 6 x 0.3048. Rounded to 1.83 m for everyday use, it is the usual crossover point in height charts, and 6 ft 2 in works out to 1.8796 m.
How do I convert feet to meters in my head?
Take three tenths of the feet, then add 1.6 percent. The trick is exact, not approximate, because 0.3 x 1.016 = 0.3048. For 500 ft: 150 plus 2.4 gives 152.4 m, which is the precise answer.
Why are flight altitudes given in feet?
International aviation standardized on feet for vertical measurement, and almost all airspace assigns altitudes and flight levels that way regardless of local units; China is the main metric exception. 35,000 ft converts to exactly 10,668 m, and crews crossing metric boundaries use published level tables for this pair.
Is 1,000 feet exactly 304.8 meters?
Yes, exactly, because the foot is defined as 0.3048 m rather than measured. Every multiple of feet converts without error; the only approximation in a result like 304.8 m is any rounding you apply afterwards.
Is a 2.4 m ceiling the same as an 8 foot ceiling?
Close but not equal: 8 ft is 2.4384 m, so the metric 2.4 m standard is 38 mm lower. Furniture and panel products sized for one market can therefore miss the other by a few centimeters.
How do I convert feet and inches together to meters?
Turn the whole length into inches first, then multiply by 0.0254. For 5 ft 10 in: 70 in x 0.0254 = 1.778 m. The converter accepts the pair directly and does the twelfths for you, avoiding the double rounding of converting each part alone.
Is there an in-depth guide to the Feet to Meters Converter?
Yes. “Unit Conversion Factors: Exact Definitions, Gallons and Temperature Offsets” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.