Home Energy Saving Checklist

Draughts and insulation first, then controls, then appliances. Plus the ventilation warning: sealing a house without it causes mould that costs more than heating.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Home Energy Saving Checklist?

Energy advice is usually ordered by what is easy to sell rather than by what saves most. The order that actually works is draughts and insulation first, then heating controls, then how you use hot water and appliances. Standby power matters far less than people think; a towel rail left running matters far more.

One warning belongs with all of it: sealing a house without ventilating it causes condensation, mould and a health problem that costs more than the heating ever did.

  • Ordered by payback rather than by what is easy to buy
  • Separates draughts from ventilation, which must stay clear
  • Answers the leave-it-on-low question for most systems
  • Points at the appliances that actually dominate consumption
  • Editable and exportable as PDF, CSV, Markdown or a Google Form
Read the guide: Why Checklists Work, and How to Use One Properly

Updated

How to use the Home Energy Saving Checklist

  1. Start free: thermostat down a degree, draughts blocked, cylinder insulated, efficient bulbs.
  2. Check loft insulation depth against the current recommendation and top it up.
  3. Find out what your walls are, get a survey, and check which grants you qualify for.
  4. Match heating times to when you are home, use radiator valves, and keep ventilating.
  5. Check your tariff, submit real readings, and compare running costs when replacing appliances.

Worked examples

Bills too high

Input

Free first section

Output

Thermostat, draughts, cylinder jacket, radiator basics

Quickest payback of anything on the page.

Older house

Input

Insulation section

Output

Loft topped up, wall type established, grants checked

Many lofts are well below current recommendations.

Replacing a fridge

Input

Appliance item

Output

Compared on running cost rather than price

An old fridge can cost more to run than to replace.

Background and insight

The free items come first because they are free and because heating dominates most bills in cold climates. A single degree off the thermostat is measurable. Draught-proofing has among the quickest paybacks of any measure, with the caveat that airbricks, extractor vents and trickle vents are not draughts and must stay clear. An uninsulated hot water cylinder is one of the largest single avoidable losses in an older home.

Insulation is where the large savings are, and topping up thin loft insulation is usually the highest-return measure in an older house because many lofts are well below current recommendations. What you can do to walls depends entirely on whether they are cavity, solid or timber frame, which is why a survey beats a cold call. Many countries fund insulation and heating measures for certain households, and the eligibility rules are not obvious enough for people to check without prompting.

On controls, the honest answer to the recurring question is that for most systems, timed heating matched to when you are actually home beats leaving it on low all day. Better controls, room thermostats, zoning and weather compensation, frequently save more per pound spent than replacing a working boiler.

The appliance section corrects where people look. Heating, hot water, tumble dryers, electric showers and old fridges dominate consumption; phone chargers do not. When replacing an appliance, comparing running cost rather than purchase price is what matters, since an old fridge running constantly can cost more over a few years than replacing it.

Finally, the tariff and the readings. An uncompetitive tariff or an estimated bill undoes a lot of careful saving, and anyone struggling to pay should contact the supplier before falling behind, because energy suppliers have hardship schemes and are far more flexible before arrears than after.

Common use cases

  • Reducing bills this winter

    The free and cheap measures, in order of payback.

  • An older or draughty home

    Insulation, wall types and the grants you may qualify for.

  • Renting

    The measures that need no permission, plus the energy certificate.

  • Struggling to pay

    Tariffs, readings and contacting the supplier before arrears.

Tips and limitations

  • Do not block airbricks, extractor vents or trickle vents; they are not draughts.
  • Furniture in front of a radiator heats the furniture.
  • Better controls often save more per pound than replacing a working boiler.
  • Submit real meter readings; estimated bills build either debt or credit.
  • Contact your supplier before falling behind. Hardship schemes exist and work better early.

Sources and further reading

  1. Improve the energy efficiency of your home, UK Government. Measures, energy certificates and available schemes
  2. Save Energy, US Department of Energy. Insulation, heating, water heating and appliances
  3. ENERGY STAR, US Environmental Protection Agency. Appliance efficiency and running costs

Frequently asked questions

What are the cheapest ways to cut energy bills?

Turning the thermostat down a degree, blocking draughts at the letterbox, loft hatch, floorboards and unused chimneys, insulating the hot water cylinder, bleeding radiators and moving furniture off them, and replacing remaining inefficient bulbs.

Is loft insulation worth it?

In an older house it is usually the single highest-return measure available, because many lofts are well below the current recommended depth and topping up is relatively cheap. Check the depth you actually have before assuming it is done.

Should I leave the heating on low all day?

For most systems, no: timed heating matched to when you are actually home costs less than heating an empty house continuously. The exception is a very poorly insulated home where pipes risk freezing, where a low background setting can be sensible.

Which appliances use the most electricity?

Heating, hot water, tumble dryers, electric showers and old fridges and freezers. Phone chargers and devices on standby are a very small share, which is why focusing on them produces disappointing results.

What energy grants can I get?

Many countries fund insulation and heating measures for certain households, based on income, benefits received, the property's energy rating or the type of heating. The rules are not obvious, so check the official scheme list before paying for any measure.

Is there an in-depth guide to the Home Energy Saving Checklist?

Yes. “Why Checklists Work, and How to Use One Properly” covers the background, how it works, common pitfalls and worked examples. Read the full guide.