What Is My IP Address
See the public IPv4 and IPv6 address websites see for you, with approximate city, region and ISP. Uses ipify and ipapi.co lookups.
The interactive tool loads here when JavaScript runs.
About this toolWhat is What Is My IP Address?
This page shows the public IP address your connection presents to the internet: the address in the source field of every packet that leaves your router. It loads automatically and shows your IPv4 address, your IPv6 address if you have one, and the country, city, region and ISP that a geolocation database associates with it.
The page has to ask an outside service, because your browser cannot see its own public address from inside a home or office network. When it loads, your browser calls api.ipify.org (IPv4), api64.ipify.org (IPv6 when available) and ipapi.co (location and ISP). Those services see your IP, which is the point; nothing else is sent. Press Refresh to repeat the lookup, for example after connecting a VPN.
- Public IPv4 and, when present, IPv6 address
- Approximate country, city, region and ISP
- Copy a single value or all fields at once
- Refresh button to re-run the lookup after a network change
- States which services are called: ipify and ipapi.co
Updated
How to use What Is My IP Address
- Open the page. The lookup runs automatically and fills in the IPv4 Address row first.
- Read the IPv6 Address row if it appears. It is hidden when your connection has no IPv6.
- Check Country, City, Region and ISP/Organization. These come from ipapi.co and are approximate.
- Hover a row and click its copy icon, or use Copy All Information to copy every known field as text.
- Connect or disconnect a VPN and click Refresh to see the address change.
Background and insight
Most devices do not hold a public IPv4 address. Your laptop has a private one such as 192.168.1.23 (one of the RFC 1918 ranges: 10.0.0.0/8, 172.16.0.0/12 and 192.168.0.0/16), and your router rewrites it to the single public address your ISP assigned. That is network address translation, and it is why every device in a house shows the same result here. Many mobile and some fixed-line ISPs add another layer called carrier-grade NAT, using the 100.64.0.0/10 range from RFC 6598, so even your router does not hold the address websites see.
IPv6 removes most of that translation. A device on an IPv6 network usually has its own globally routable address, often a temporary privacy address (RFC 8981) that changes over time. When your connection supports both, browsers prefer IPv6 by default, so the IPv6 and IPv4 rows can show two very different-looking addresses for the same machine.
IP geolocation is an estimate built from registry data, ISP disclosures and measurement. Country is usually right; city is often the location of the ISP's equipment, which can be tens or hundreds of kilometres away. No IP lookup can give a street address.
Common use cases
Allow-listing your office or home
Copy your public IPv4 address into a firewall rule, database allow list or SSH security group.
Checking a VPN
Confirm that the address and country change after connecting, which shows traffic is leaving through the VPN.
Support tickets
Give your ISP or a hosting provider the exact public address they need to trace a block or a routing issue.
Spotting carrier-grade NAT
Compare this address with the WAN address on your router. If they differ, your ISP is putting you behind CGNAT, which breaks port forwarding.
Tips and limitations
- Your public IP can change. Most home connections get a dynamic address that changes on router restart or lease renewal, so allow-list rules may need updating.
- Ad blockers and privacy extensions sometimes block ipapi.co. The IPv4 row can still load while location shows Unknown.
- ipapi.co rate-limits anonymous use. If location fields show Unknown, wait a while and press Refresh.
- The location is for the network, not you. A corporate VPN or a mobile network can place you in another city or country.
Sources and further reading
- RFC 1918: Address Allocation for Private Internets, IETF. The private ranges used behind home NAT
- RFC 6598: IANA-Reserved IPv4 Prefix for Shared Address Space, IETF. The 100.64.0.0/10 range used for carrier-grade NAT
- RFC 8981: Temporary Address Extensions for Stateless Address Autoconfiguration in IPv6, IETF. IPv6 temporary privacy addresses
Frequently asked questions
Why is my public IP different from the one in my network settings?
Your device holds a private address such as 192.168.x.x, and your router translates it to the public address your ISP assigned. Websites only see the public one, which is what this page shows.
Can someone find my home address from my IP address?
Not from the IP alone. Public geolocation databases usually locate an IP to a city or region, often where the ISP's equipment sits. Your ISP can link an IP to a subscriber, but only releases that under legal process.
Why does this page show both an IPv4 and an IPv6 address?
Your connection is dual-stack, meaning it has both. The IPv4 address is usually shared through NAT, while the IPv6 address typically belongs to your device. Websites see whichever protocol the browser uses for that connection, and browsers prefer IPv6.
Which services does this IP checker contact?
It calls api.ipify.org and api64.ipify.org to read your IPv4 and IPv6 addresses, and ipapi.co for location and ISP. Each service sees your IP address and browser request headers, as any website would.
How can I tell if I am behind carrier-grade NAT?
Compare the address here with the WAN address in your router's admin page. If the router shows something in 100.64.0.0/10 or another private range, or simply a different address, your ISP is using CGNAT.
Why does my IP location show the wrong city?
Geolocation databases often map an IP to where the ISP routes traffic, not where you are. Mobile networks and VPNs make this worse. Country is usually correct; city should be treated as a rough guess.
Is there an in-depth guide to What Is My IP Address?
Yes. “Public IP Addresses Explained: NAT, Geolocation and Lookups” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.