Paper Size Converter
Exact dimensions for A0 to A7, B0 to B5, Letter, Legal, Tabloid, Executive and Half Letter in mm, cm and inches, with the closest match across systems.
The interactive tool loads here when JavaScript runs.
About this toolWhat is the Paper Size Converter?
Pick any of nineteen paper sizes, the ISO 216 A series from A0 to A7, the B series from B0 to B5, or the North American Letter, Legal, Tabloid, Executive and Half Letter, and read its exact dimensions in millimeters, centimeters and inches side by side. A4 shows as 210 × 297 mm, 21.00 × 29.70 cm and 8.27 × 11.69 in.
Under the dimensions, the page names the closest size in the other system by sheet area, which is the practical question behind most lookups: A4 pairs with Letter, Tabloid pairs with A3, Half Letter pairs with A5. A full table of all nineteen sizes sits below with your selection highlighted, so neighbouring sizes are one glance away.
The lookup runs in your browser with nothing sent anywhere, and the toolbar copies a link that reopens the page on the size you chose, which is useful when a print spec needs to point at exact numbers.
- Nineteen sizes: A0 to A7, B0 to B5 and five North American sheets
- Dimensions in millimeters, centimeters and inches at once
- Closest cross-system match computed by sheet area
- Full comparison table with the chosen size highlighted
- Share link that reopens the page on your size
Updated
How to use the Paper Size Converter
- Select a paper size from the list; A and B series sizes and the five North American sizes are all there.
- Read the dimensions in millimeters, centimeters and inches in the three cards.
- Note the closest size in the other system, named below the cards with its dimensions.
- Scan the full table to compare neighbouring sizes; your selection is highlighted.
- Copy the toolbar link to share the page already set to that size.
Worked examples
A4 in inches
Input
A4
Output
8.27 × 11.69 in (210 × 297 mm)
The closest North American size is Letter. A4 is narrower and taller, which is why an unscaled A4 PDF clips top and bottom margins on a US printer.
Letter for an ISO audience
Input
Letter
Output
215.9 × 279.4 mm (8.5 × 11 in)
Its area pairs it with A4. Documents that must print cleanly on both should keep about 15 mm clear at every edge so neither direction of travel clips anything.
Tabloid across systems
Input
Tabloid (Ledger)
Output
279.4 × 431.8 mm (11 × 17 in)
The closest ISO size is A3 (297 × 420 mm). The same sheet is called Ledger when used landscape, which is the accounting-book orientation the name comes from.
Half Letter notebooks
Input
Half Letter
Output
139.7 × 215.9 mm (5.5 × 8.5 in)
A Letter sheet cut across the middle. Its ISO twin is A5 (148 × 210 mm), which is why planner inserts in the two sizes almost but not quite interchange.
Background and insight
The A series is built on one constraint: every sheet has sides in the ratio square root of 2, about 1.414. That ratio is the only one that survives halving, so folding a sheet across its long side produces two sheets of exactly the same shape. Georg Christoph Lichtenberg described the property in 1786, Germany standardised it as DIN 476 in 1922, and it became international standard ISO 216. The anchor is area, not length: A0 is defined as one square meter (841 × 1189 mm multiplies out to 0.9999 m²), and each following size is the previous one folded in half, down to the 74 × 105 mm A7.
The folding logic is why photocopiers in most of the world have 71% and 141% buttons: those are 1 over root 2 and root 2, the exact factors that move a document one step down or up the series with no cropping and no wasted margin. The B series fills the gaps, with each B size the geometric mean of the two A sizes around it; B0 starts at 1000 × 1414 mm, and B5 (176 × 250 mm) is a common choice for books precisely because it sits between A4 and A5.
North American sizes follow no such system. Letter is 8.5 × 11 inches (215.9 × 279.4 mm), Legal shares the width at 14 inches long, Tabloid is 11 × 17 inches, exactly two Letter sheets, and the aspect ratio changes at every step. The clash with A4 is the practical consequence: Letter is about 6 mm wider and 18 mm shorter than A4, so a US document printed in Lisbon loses its bottom margin and an A4 document printed in Chicago loses its sides, unless the print dialog scales to fit. Nearly every country has adopted ISO 216; the United States and Canada are the main exceptions.
Common use cases
Printing abroad
Check how a Letter résumé will land on the A4 paper in every printer outside North America before you email it.
Designing for both systems
Set margins that survive A4 and Letter when one template must serve offices on both sides of the Atlantic.
Buying frames and envelopes
Translate a print measured in millimeters into the inch-labelled frame sizes a US store sells.
Scaling posters and book pages
Move artwork between A3, A4 and A5 knowing the shape is preserved and the scale factor is exactly root 2 per step.
Tips and limitations
- When printing across systems, switch the print dialog to "scale to fit" rather than 100%; the sizes differ enough to clip margins in one direction or the other.
- A document meant for both A4 and Letter is safest with at least 15 mm of margin on every side; that covers the 6 mm width gap and the 18 mm height gap with room to spare.
- The 71% and 141% presets on copiers are the exact A-series step factors; two reductions at 71% equal one at 50%.
- Grammage transfers cleanly within ISO sizes: an 80 g/m² A0 sheet weighs 80 g, so an A4 sheet, four halvings later, weighs exactly 5 g, a trick worth knowing when estimating postage.
- C-series envelope sizes (C4, C5, C6) belong to a separate standard, ISO 269, and are not in this chart; a C4 envelope takes an unfolded A4 sheet.
Sources and further reading
- ISO 216, Wikipedia. The root-2 ratio, the 1 m² anchor and the A and B series tables
- Paper size, Wikipedia. North American sizes and worldwide adoption of ISO 216
- Letter (paper size), Wikipedia. The 8.5 × 11 inch sheet and its history
Frequently asked questions
Is A4 the same as Letter paper?
No. A4 is 210 × 297 mm and Letter is 215.9 × 279.4 mm, so Letter is about 6 mm wider and A4 about 18 mm taller. They are each other's closest match by area, which is why documents move between them with "scale to fit" rather than unchanged.
Why is A4 exactly 210 × 297 mm?
It falls out of two rules: A0 has an area of one square meter, and every sheet keeps sides in the ratio root 2 so halving preserves the shape. Fold A0 in half four times and the arithmetic lands on 210 × 297 mm.
What are the dimensions of Legal paper?
Legal is 8.5 × 14 inches, which is 215.9 × 355.6 mm. It shares its width with Letter and adds three inches of length, historically for contracts and depositions; most of the world has no direct ISO equivalent in everyday use.
What is Tabloid size, and is Ledger different?
Tabloid is 11 × 17 inches (279.4 × 431.8 mm), the area of two Letter sheets. Ledger is the identical sheet used landscape; the two names describe orientation, not different paper. Its nearest ISO size is A3.
What is B5 paper used for?
B5 is 176 × 250 mm, the geometric mean between A4 and A5. It is a common trim size for books, manuals and Japanese notebooks: noticeably smaller than A4 but roomier than A5, with the same root-2 shape as the rest of the ISO family.
Why does my US document print wrong on A4?
Letter is shorter and wider than A4, so printing at 100% either clips the sides (Letter content on A4) or the top and bottom (A4 content on Letter). Enable scaling in the print dialog, or design with margins generous enough to absorb the difference.
Is there an in-depth guide to the Paper Size Converter?
Yes. “Unit Conversion Factors: Exact Definitions, Gallons and Temperature Offsets” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.