Square Feet to Square Meters Converter

Convert square feet to square meters with the exact 0.09290304 factor, apartment and house examples, step-by-step working and exportable results.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Square Feet to Square Meters Converter?

You are scanning rental listings in Berlin or Tokyo where every apartment is quoted in square meters, and your sense of space was calibrated by square-foot listings back home. Or the reverse: a relocating colleague asks what 1,500 ft² means in m². This converter answers both directions with the exact relation, 1 ft² = 0.09290304 m², so a 1,500 ft² house is 139.35 m² and a 70 m² flat is 753 ft².

The number 0.09290304 is simply the foot squared: 0.3048 m x 0.3048 m. That squaring is also the trap in doing it by hand, because dividing by 3.28 only once leaves the answer more than three times too large. Going the other way, one square meter holds 10.7639 square feet, which is why metric apartments sound small to US ears until the conversion is done properly.

Nothing you enter leaves the page; the multiplication runs in your browser alone. The working is laid out beneath the answer with the squared definition on its own line, and the report bar renders the conversion as a CSV or PDF or hands you a link that opens with your figure in place.

  • Exact squared definition: 1 ft² = 0.09290304 m², shown in the working
  • Both directions plus price-per-area conversion with the 10.7639 reciprocal
  • Instant results as you type, computed locally with nothing transmitted
  • Steps panel that spells out the squaring most hand conversions miss
  • CSV and PDF export and a share link carrying your exact figure
Read the guide: Unit Conversion Factors: Exact Definitions, Gallons and Temperature Offsets

Updated

How to use the Square Feet to Square Meters Converter

  1. Enter the floor area from the listing or plan, in square feet or square meters.
  2. Pick the direction; the converted figure appears as you type.
  3. Open the steps to see the squared definition applied, for example 1,500 x 0.09290304 = 139.35456.
  4. Convert the asking price per unit area too, so both listings compare on one basis.
  5. Export or share the result from the report bar when the comparison goes into an email or spreadsheet.

Worked examples

A US house in metric

Input

1,500 ft²

Output

139.35 m²

The full product is 139.35456 m², with no rounding in the factor itself. An agent abroad would file this as a roomy 140 m² family home.

A European flat in square feet

Input

70 m²

Output

753.47 ft²

70 x 10.763910 = 753.47 ft². A 70 m² two-bedroom reads as tiny to someone expecting four digits, but it sits close to the 750 ft² one-bedroom common in US cities.

A studio apartment

Input

650 ft²

Output

60.39 m²

650 x 0.09290304 = 60.387 m². Listings often round this to 60 m², quietly dropping a third of a square meter; the steps panel keeps the exact figure visible.

Price per unit area

Input

$200 per ft²

Output

$2,152.78 per m²

A rate per square foot grows by the 10.7639 factor when restated per square meter, because each square meter contains that many square feet. The totals match either way: 139.35 m² x $2,152.78 equals 1,500 ft² x $200.

Background and insight

Floor area is the one measurement nearly every adult compares across borders, because housing is advertised by it. The US, Canada and India lead with square feet; continental Europe, Latin America, Japan (alongside the tatami-based jo and the tsubo) and most of the rest of the world print square meters. The UK sits in between, with agents quoting ft² and m² side by side. Since the foot has been exactly 0.3048 m everywhere since 1959, the conversion itself is identical in every market.

What differs is what gets measured, and that catches relocators more often than the arithmetic. A US condo figure may be gross area including a share of walls, a German Wohnfläche excludes areas under low ceilings, and a rentable office figure adds a loss factor for lobbies and corridors. Converting 1,000 ft² to 92.9 m² is exact; whether the two listings measured the same boundary is a separate question worth asking the agent.

A few anchors make metric listings readable at a glance. 50 m² is 538 ft², a generous one-bedroom. 100 m² is 1,076 ft², a comfortable family apartment or a modest house. 200 m² is 2,153 ft², similar to a typical new US single-family home. Price arithmetic scales by the same constant in reverse: a rate per square foot multiplied by 10.7639 becomes the rate per square meter.

Common use cases

  • Renting or buying abroad

    Turn m² listings into square feet you can picture, before a viewing trip or a lease signing.

  • Relocation comparisons

    Put your current home and the destination market in one unit, including price per area.

  • Architecture and furniture

    Convert plans, rugs and material coverage between the unit on the drawing and the unit at the store.

  • Short-term rental hosting

    State your property's size correctly for platforms and guests who use the other system.

Tips and limitations

  • Square the length factor or the answer is wrong by 10x: areas use 10.7639, not 3.28. If a conversion looks suspiciously modest, this is the first thing to check.
  • For a quick read of metric listings, add a zero to the m² figure and then add about 8 percent: 85 m² becomes 850, plus 8 percent is around 918, near the true 914.9 ft². In reverse, drop a zero from ft² and trim 7 percent.
  • Memorize one pair that matches your life, such as 1,000 ft² = 92.9 m² or 100 m² = 1,076 ft², and scale other listings from it.
  • Ask what the listed area includes. Balconies, garages, basements and wall thickness are counted differently between markets, and that spread is usually larger than any rounding.
  • Carpet, tile and paint coverage convert with the same factor, so a product covering 350 ft² per unit covers 32.5 m².

Sources and further reading

  1. NIST Special Publication 811: Guide for the Use of the International System of Units, National Institute of Standards and Technology. Appendix B gives the exact 0.09290304 m² square-foot factor
  2. NIST Handbook 44, Appendix C: General Tables of Units of Measurement, National Institute of Standards and Technology
  3. Square foot, Wikipedia. Where the unit is used and how floor areas are quoted

Frequently asked questions

How many square meters is a 1,000 square foot apartment?

92.90 m², from 1,000 x 0.09290304. In most European markets that is a solid two-bedroom; the same flat would be advertised there as 93 m².

Why does dividing square feet by 3.28 give the wrong answer?

Because 3.28 converts lengths. Area has two dimensions, so the factor must be squared: divide by 10.7639, or multiply by 0.09290304. Using the length factor leaves the result about 3.3 times too big.

How big is 70 square meters in square feet?

753.47 ft². Multiply the square meters by 10.763910, the reciprocal of the exact 0.09290304 m² definition of a square foot.

How do I convert a price per square foot to a price per square meter?

Multiply by 10.7639. A $250 per ft² condo is $2,690.98 per m². Rates move opposite to areas: the unit of area gets bigger, so the price per unit rises.

Do square feet and square meters measure the same floor area?

The units convert exactly, but measurement conventions differ by market: gross versus net area, shared walls, balconies and low-ceiling space are each included in some standards and excluded in others. Compare what was measured, not only the converted number.

What is 2,000 square feet in square meters?

185.81 m², since 2,000 x 0.09290304 = 185.80608. Rounding to 186 m² is fine for a listing; keep the full value when it feeds a cost calculation.

Is there an in-depth guide to the Square Feet to Square Meters Converter?

Yes. “Unit Conversion Factors: Exact Definitions, Gallons and Temperature Offsets” covers the background, how it works, common pitfalls and worked examples. Read the full guide.