Australia version. Metres by default, with Australian squares (100 sq ft) and perches shown next to square metres, hectares and acres. US version

Area Calculator (Australia)

Work out area in square metres and convert it to builders' squares, perches, hectares and acres, for house plans, block sizes and older Australian land titles.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Area Calculator?

Australia went metric decades ago, but two older units still turn up when you buy or build. Builders and display homes often quote house size in squares, where one square is 100 square feet, or about 9.29 m². Older blocks, especially in Queensland, are described in perches: one perch is 30¼ square yards, about 25.29 m², so a classic 32-perch block is about 809 m².

This version works in metres and, with local units switched on, lists squares and perches under the usual square metres, hectares and acres. Measure a rectangle of 16 by 15 metres and you get 240 m², which is 25.8 squares; a block of 30 by 15.6 metres is 468 m², 18.5 perches.

For context, the ABS found that the average site area of new house approvals in the capital cities fell from 602 m² in 2005-06 to 467 m² in 2019-20, while the average new house grew from 234 m² to 248 m² of floor area. That is about 18.5 perches of land and 26.7 squares of house.

  • Eleven shapes, including Heron's three-side triangle and regular polygons
  • Eight length units and ten area units, including acres and hectares
  • Optional Australian units: builders' squares (100 sq ft) and perches
  • Perimeter where it can be determined, with Ramanujan's ellipse approximation
  • Labelled shape sketches and the substituted formula
  • Copy and shareable links
Read the guide: Area and Volume Formulas, and Why They Work

Updated

How to use the Area Calculator

  1. Pick the shape and leave the length unit on metres.
  2. Enter the measurements from the plan or your tape. Irregular blocks can be split into rectangles and triangles and added up.
  3. Keep "Also show local units" on Australia to see squares and perches under the metric results.
  4. Switch "Show area in" to hectares for rural land or acres when comparing with an old title.

Worked examples

House floor area in squares

Input

Rectangle 16 m x 15 m

Output

240 m² = 25.83 squares

A square is 100 sq ft, not 10 m². Using 10 m² would understate this house by more than two squares.

A suburban block

Input

Rectangle 30 m x 15.6 m

Output

468 m² = 18.50 perches = 0.0468 ha

Close to the ABS capital-city average site area for new houses in 2019-20.

The old quarter-acre block

Input

Rectangle 40 m x 20.2 m

Output

808 m² = 31.95 perches = 0.1997 acres

A 32-perch block is exactly a fifth of an acre, about 809 m²; 40 perches would be a quarter acre (about 1,012 m²).

A triangular corner of a block

Input

Triangle with base 30 m and height 40 m

Output

600 m² = 23.72 perches = 0.06 ha

Split an irregular block into a rectangle and triangles, work out each, and add them.

Background and insight

The conversions rest on exact definitions. Since the 1959 international yard and pound agreement the inch is exactly 2.54 cm, so a square foot is exactly 0.09290304 m². An international acre is 43,560 square feet, or 4,046.8564224 m², and a hectare is a 100 m by 100 m square, 10,000 m². One hectare is therefore about 2.471 acres. NIST retired the older US survey foot at the end of 2022; acreage based on it differs from the international acre by about four parts per million, far below the accuracy of any tape measurement.

Several formulas are the same idea in disguise. A parallelogram is a rectangle with one end sliced off and moved to the other side, so it keeps base × height. A triangle is half of such a parallelogram. A trapezoid is the average of its two parallel sides times the height. A regular polygon with n sides of length s splits into n identical triangles meeting at the centre, which leads to n·s² / (4·tan(180°/n)). As n grows the polygon approaches a circle, and the formula approaches πr².

Heron's formula for a triangle from three sides needs no angle or height at all, which makes it the practical choice when you can measure the edges of a triangular bed or plot but not its height.

Common use cases

  • Flooring, paint and turf

    Get the area of each room or lawn section in the unit the product is sold in, then add a waste allowance.

  • Land and property

    Convert a lot measured in feet or metres into acres or hectares for listings, tax forms or planning applications.

  • School geometry

    Check answers for circles, trapezoids and sectors, with the substituted formula shown for each step.

  • Material estimates

    Work out the surface of a circular table top, an elliptical rug or a hexagonal tile before ordering.

Tips and limitations

  • Builders do not all count the same spaces (garage, alfresco, porch) when they quote a house in squares, so check what each quote includes before comparing two homes.
  • Plans, contracts and listings today give area in square metres or hectares. Use perches and acres to compare with older documents and local talk.

Sources and further reading

  1. Australians building houses on smaller blocks, Australian Bureau of Statistics. Average site area (602 m² to 467 m²) and floor area (234 m² to 248 m²) of new house approvals in the capital cities, 2005-06 to 2019-20.
  2. SI Units: Length, National Institute of Standards and Technology. The international foot (0.3048 m) and yard (0.9144 m) behind the square and the perch.

Frequently asked questions

How many square metres is a square?

9.290304 m², because a square is 100 square feet and a foot is exactly 0.3048 m. Ten squares is about 92.9 m², not 100 m².

How big is a 32-perch block?

About 809 m². A perch is 30¼ square yards (25.29285264 m²), and 160 perches make an acre, so 32 perches is a fifth of an acre.

How many squares is a 250 m² house?

About 26.9 squares. Enter 20 m by 12.5 m (or any rectangle with that area) to see it.

How many square metres in a quarter-acre block?

About 1,012 m², which is 40 perches. Most new suburban blocks are well under half of that.

Should I use hectares or acres for rural land?

Use hectares to match plans and contracts, which are metric. Acres still appear in advertising and conversation; one hectare is about 2.47 acres.

Is there an in-depth guide to the Area Calculator?

Yes. “Area and Volume Formulas, and Why They Work” covers the background, how it works, common pitfalls and worked examples. Read the full guide.