Australia version. Metres and square metres first, with the old "squares" (100 sq ft) that builders and listings still quote, and flooring priced per m² in A$. US version

Floor Area Calculator: m² and Squares (Australia)

Add up rooms in metres to get floor area in square metres, convert to building "squares" and square feet, and price flooring, tiles or carpet per m² in A$.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Square Footage Calculator?

Australia measures floor area in square metres, trade measurement law requires goods sold by measurement to use legal units, and flooring is sold and labelled by the square metre. Yet house sizes are still often given in squares, an imperial holdover where one square is 100 sq ft, or 9.29 m². A 224 m² house is 24.11 squares.

This version takes room sizes in metres, totals them in m², and shows squares and square feet alongside, so you can compare a builder's brochure in squares with a plan in m². For renovations, it prices flooring per m² with a cutting allowance.

When you compare homes, check what is included. Some figures cover the garage, alfresco and porch under the main roof; others cover only the living area.

  • Five shapes per section: rectangle, L-shape, circle, triangle and trapezoid
  • Unlimited add and subtract rows (up to 20) with a running area per row
  • Results in ft², m², yd², in², acres and hectares at once
  • Cost by ft², yd² or m² with an optional waste percentage
  • Shareable link that reopens every section exactly as entered
Read the guide: Estimating Concrete, Flooring, Tile and Gravel Without Running Short

Updated

How to use the Square Footage Calculator

  1. Keep measurements in metres.
  2. Add a section per room or wing; use an L-shape for open-plan kitchen and living areas.
  3. Subtract areas you will not cover, such as a kitchen island on tiles.
  4. Set the price per m² in A$ and a waste allowance for the flooring type.

Worked examples

House size in squares

Input

Rectangle 16 x 14 m

Output

224 m² = 24.11 squares (2,411 sq ft)

A brochure that says "24 squares" is describing about the same size. Ask whether the garage and alfresco are counted.

Converting a 25-square house

Input

Area 25 squares (2,500 sq ft)

Output

232.26 m²

Multiply squares by 9.29 to get square metres.

Hybrid flooring for an open-plan living area

Input

L-shape 8.5 x 4.2 m plus 3.6 x 3.0 m, 10% waste, A$65 per m²

Output

46.5 m²; 51.15 m² to buy; A$3,324.75

Flooring cartons list the m² they cover, so divide 51.15 by the carton size and round up.

Background and insight

Square footage is a measure of area: length times width for a rectangle. The trap is the unit change. A square foot is 0.09290304 square metres exactly, because the international foot has been defined as 0.3048 m since 1959, but a square yard is 9 square feet, not 3, and an acre is 43,560 square feet. Converting a length and then squaring is safe; converting an area by the length factor is the error that produces a quote three times too small.

Splitting irregular shapes into rectangles and triangles is the same method surveyors use for plan areas, and it is exact as long as the pieces do not overlap. When they do, subtract the overlap or measure the pieces differently. For a home appraisal or listing, the gross living area follows local or ANSI Z765 rules about walls, stairs and ceiling height, which this calculator does not apply; it measures whatever you describe.

Common use cases

  • Flooring and carpet

    Measure every room and closet as separate sections, subtract fixed cabinets, and price the total with a waste allowance.

  • Painting and wall coverings

    Treat each wall as a rectangle and subtract windows and doors to estimate paint or wallpaper coverage.

  • Sod, seed and landscaping

    Combine curved beds (circles and trapezoids) and lawns, then convert to square yards or acres for supplier quotes.

  • Rent and real-estate checks

    Sanity-check a listed square footage or compare price per square foot between properties.

Tips and limitations

  • Measure to the inside face of the walls for flooring, and to the middle of door openings.
  • Give builders and suppliers metres and square metres; squares are a rough comparison, not an order quantity.
  • Keep a carton of flooring spare for future repairs.

Sources and further reading

  1. Australian trade measurement laws, business.gov.au. Legal units of measurement and transactions by measurement.
  2. National Measurement Act 1960, Federal Register of Legislation

Frequently asked questions

How many square metres is a square?

One square is 100 square feet, which is 9.29 m² (exactly 9.290304). So 20 squares is about 186 m² and 30 squares about 279 m².

Why do Australian builders still talk about squares?

It is a habit from before metrication. Floor plans, contracts and flooring sales are in m², but squares stuck around as a quick way to describe house size. Convert to m² before comparing quotes.

How do I work out the floor area of my house in m²?

Split the plan into rectangles, multiply length by width for each in metres and add them up. An L-shaped plan of 18 x 10 m plus 8 x 6 m is 228 m², about 24.5 squares.

Is flooring sold by the square metre in Australia?

Yes. Trade measurement law requires goods sold by measurement to use legal units, and flooring is sold and labelled by the square metre, with cartons showing the m² they cover.

Does the floor area include the garage and alfresco?

It depends who is quoting. Builders often give a total under the main roof, including garage, alfresco and porch, while a living area figure leaves them out. Ask for both before comparing homes.

Is there an in-depth guide to the Square Footage Calculator?

Yes. “Estimating Concrete, Flooring, Tile and Gravel Without Running Short” covers the background, how it works, common pitfalls and worked examples. Read the full guide.