Australia version. Metric, with 20 kg bags of concrete mix as Australian hardware stores sell them, premix in m³, A$ prices, and NCC Housing Provisions concrete rules. US version

Concrete Calculator (Australia)

Cubic metres of concrete and 20 kg bags of concrete mix for shed slabs, paths, footings and posts, with waste, an A$ cost and when premix delivery makes more sense.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Concrete Calculator?

Bagged concrete in Australia comes in 20 kg bags, and premix trucks deliver by the cubic metre. The useful question is which to use. Cement Australia's own guide is a handy rule: under 0.1 m³, mix bags of concrete mix yourself; from 0.1 to 0.5 m³, consider mixing your own from builder's cement, sand and aggregate; over 0.5 m³, where the truck can get in, order premix.

A 3 by 3 m garden shed slab, 100 mm thick with 10% extra, is 0.99 m³. That would be 106 bags of 20 kg, so it is firmly a premix job. A single clothesline post in a 300 mm hole 600 mm deep needs about 5 bags, which is a wheelbarrow job.

House slabs and footings are a different matter. The NCC Housing Provisions call for N20 concrete (at least 20 MPa at 28 days) with 20 mm aggregate and a 100 mm slump, and moist curing for seven days. A specified strength like that has to come from a premix plant, not bags.

  • Six pour shapes: slab, footing, round column or hole, wall, curb and gutter, and steps with an optional landing
  • Imperial and metric inputs that convert in place when you switch
  • Bag counts for 40, 50, 60 and 80 lb and 20 or 25 kg bags from published yields
  • Ready-mix order rounded to an editable increment, plus cost for bags and ready-mix
  • Formula panel, copy and share link; runs entirely in the browser
Read the guide: Estimating Concrete, Flooring, Tile and Gravel Without Running Short

Updated

How to use the Concrete Calculator

  1. Keep units on metric: lengths in metres, thickness and diameter in centimetres.
  2. Pick the shape, enter the sizes and the number of identical pours (posts, pier holes).
  3. Choose the 20 kg bag and put in the price per bag and your premix quote per m³ in A$, including any short-load fee.
  4. Use the volume to choose: bags under 0.1 m³, a site mix or small load to 0.5 m³, premix above that.

Worked examples

Garden shed slab, 3 x 3 m at 100 mm

Input

Slab 3 x 3 m x 10 cm, 10% extra, 20 kg bags

Output

0.99 m³; 106 bags of 20 kg; premix order 1 m³

Well over the 0.5 m³ mark for premix. Bed the slab on 5 cm of compacted road base or crusher dust, as Cement Australia describes, so the thickness stays even.

Garden path, 6 m long, 900 mm wide, 75 mm thick

Input

Slab 6 x 0.9 m x 7.5 cm, 10% extra

Output

0.446 m³; 48 bags of 20 kg

This falls in the 0.1 to 0.5 m³ middle band, where mixing builder's cement with sand and aggregate in a hired mixer is cheaper than 48 bags of pre-blended mix.

Clothesline post

Input

Round hole 30 cm diameter x 0.6 m deep, quantity 1, 10% extra

Output

0.047 m³; 5 bags of 20 kg

Under 0.1 m³, so bags of concrete mix are the easy answer. Allow about 1.75 litres of water per 20 kg bag, the figure on Cement Australia's product page.

Background and insight

Bag counts use published yields rather than weight. The QUIKRETE Concrete Mix data sheet lists about 0.30 cubic feet for a 40 lb bag, 0.45 for 60 lb and 0.60 for 80 lb, and Sakrete gives the same 0.6 cubic feet for its 80 lb bag. Those yields are for mixed concrete, so a cubic yard (27 cubic feet) takes 45 bags of 80 lb or 60 bags of 60 lb. Kilogram bags sold outside the US are scaled from the 80 lb figure by weight, roughly 11.7 litres per 25 kg bag; the yield printed on your bag wins if it differs.

Ready-mix plants batch by the cubic yard or cubic metre and many dispatch in quarter-yard steps, so the calculator rounds up to an increment you can change. Small loads often carry a short-load fee, which is why a 1.4 yard patio can cost nearly as much as a 3 yard one. Normal-weight concrete weighs about 150 lb per cubic foot (2,400 kg per cubic metre), which matters if you are hauling bags in a car or checking a trailer limit.

Common use cases

  • Patios, sheds and hot-tub pads

    Size a slab and see whether 60-odd bags or one short ready-mix load makes more sense for the job.

  • Fence and deck posts

    Multiply one hole by the number of posts to buy the right pallet quantity in one trip.

  • Footings and piers

    Price square pads and round sonotube piers for a deck or small extension before calling the plant.

  • Curbs, edging and steps

    Handle the awkward L-shaped curb and gutter section and stacked steps without sketching volumes by hand.

Tips and limitations

  • Check for underground pipes and cables before you dig; Before You Dig Australia is the free national referral service.
  • Cement Australia notes that a 20 kg bag is a two-person lift for safety.
  • Cut control joints in larger slabs; Cement Australia suggests joints at about 1.5 m intervals for a DIY slab.

Sources and further reading

  1. Part 4.2 Footings, slabs and associated elements (NCC 2025 Housing Provisions), Australian Building Codes Board. 4.2.10 concrete: N20, 20 mm aggregate, 100 mm slump, 7 days moist curing.
  2. How to lay a concrete slab, Cement Australia. Bags under 0.1 m³, own mix to 0.5 m³, premix above; 20 kg bags are a two-person lift.
  3. Concrete Mix, Cement Australia. 20 kg bag; 1.75 litres of water per bag.

Frequently asked questions

How many 20 kg bags of concrete do I need for a cubic metre?

About 107. The calculator uses a yield of about 9.4 litres per 20 kg bag, scaled by weight from a published bag yield, so check the yield printed on your brand's bag.

When should I order premix instead of bags?

Cement Australia's guide is under 0.1 m³ in bags, 0.1 to 0.5 m³ mixing your own from cement, sand and aggregate, and over 0.5 m³ premix where the truck has access. A 3 x 3 m slab at 100 mm is already 0.9 m³.

What strength concrete does the NCC require for a house slab?

NCC Housing Provisions 4.2.10 calls for concrete made to AS 3600 with at least 20 MPa at 28 days (N20), 20 mm maximum aggregate and a nominal 100 mm slump, with no water added to raise the slump, and slabs moist cured for 7 days. Engineered slabs may specify more.

Do I need approval for a concrete shed slab?

It depends on your state and council. Small garden sheds are often exempt development, but there are size, height and setback limits. Check your council or state planning portal before pouring.

How much concrete for a letterbox or fence post?

A 300 mm hole 600 mm deep holds about 0.042 m³, so 5 bags of 20 kg with a little extra. A 250 mm hole the same depth takes about 4.

Is there an in-depth guide to the Concrete Calculator?

Yes. “Estimating Concrete, Flooring, Tile and Gravel Without Running Short” covers the background, how it works, common pitfalls and worked examples. Read the full guide.