Canada version. Square feet and inch tile sizes as Canadian stores sell them, boxes by tile count or sq ft, CA$ prices, and NBC rules for tile substrates. US version
Tile Calculator (Canada)
Count tiles and boxes for floors, backsplashes and showers in square feet, with 12 x 24 and subway tile sizes, grout joints, box coverage and a CA$ estimate.
The interactive tool loads here when JavaScript runs.
About this toolWhat is the Tile Calculator?
Canadian tile stores label boxes in square feet and size tiles in inches: 12 x 24 porcelain for floors, 3 x 6 subway for backsplashes, 2 x 2 mosaics on mesh for shower floors. This version starts there and adds a grout estimate in kilograms and pounds.
A 14 by 12 ft kitchen in 12 x 24 in porcelain with a 1/8 in joint and 10% waste needs 91 tiles, so 12 boxes of eight. The waste matters more than people think with large tiles, because every cut at a wall is half a tile.
Behind the numbers, the substrate decides whether tile lasts. The National Building Code requires ceramic tile to be set in a mortar bed or bonded to a sound, smooth base, and panel subfloors under adhesive-set tile need their edges supported. On a typical joist floor that often means extra blocking or a cement or membrane underlayment.
- Grout joint counted in every tile, not just the tile face
- Layout presets for straight, offset, diagonal and herringbone waste, all editable
- Boxes from tiles per box or coverage per box, with a cost estimate
- Grout weight in kg and lb from the published manufacturer formula
- Imperial and metric with automatic conversion; copy and share link
Updated
How to use the Tile Calculator
- Keep units on imperial and enter the room in feet, or type the area in square feet.
- Subtract the tub, vanity and cabinets as openings.
- Enter the tile size and joint in inches: 1/16 = 0.0625, 1/8 = 0.125.
- Use tiles per box or the sq ft per box from the label, and the box price in CA$.
Worked examples
Kitchen floor in 12 x 24 porcelain
Input
14 x 12 ft, 24 x 12 in tiles, 1/8 in joint, 10% waste, 8 tiles per box
Output
91 tiles (82.7 exact); 12 boxes; about 4.1 kg grout
Tile makers often recommend offsetting long porcelain tiles by a third rather than a half to limit lippage; the offset barely changes the count.
Subway tile on bathroom walls
Input
80 sq ft of wall, 6 x 3 in, 1/16 in joint, 10% waste, boxes of 10.76 sq ft
Output
683 tiles (620.5 exact); 8 boxes; about 3.9 kg grout
Small tiles mean many joints, so grout use per square foot is several times higher than for large-format floor tile.
Background and insight
Each tile occupies its own size plus one joint in each direction. A 12 inch tile with a 1/8 inch joint takes up 12.125 x 12.125 inches, about 2% more than the tile, so a calculator that ignores joints overstates the count for large tiles and is close enough only for very small joints. The difference grows quickly with mosaic and small subway tiles, where the joint is a larger share of each piece.
Waste comes from cuts at the edges. A straight lay wastes mainly the offcuts along two walls. Diagonal and herringbone patterns cut nearly every edge piece at an angle, and the triangles left over are rarely reusable, so installers plan 15 to 20%. Large-format tiles also waste more because a single bad cut costs a big piece. Keep a few spare tiles after the job; matching the dye lot years later is often impossible.
The grout figure comes from (A + B) / (A x B) x C x D x density, with tile length A, width B, tile thickness C and joint width D in millimetres and a density around 1.6 kg per litre for cement grout. It gives kilograms per square metre of floor.
Common use cases
Bathroom and kitchen floors
Subtract the tub, vanity or cabinet footprint and get a box count to order before demolition starts.
Shower and backsplash walls
Enter each wall as a length by height, subtract the window or niche, and use a small tile with its real joint.
Comparing tile options
Change tile size and price per box to see how a larger format or different pattern changes the order and total cost.
Ordering grout with the tile
Use the grout weight to choose between a small and large bag so the job is not held up halfway.
Tips and limitations
- Check the floor for deflection before tiling; natural stone needs a stiffer floor than porcelain.
- Use a waterproofing membrane in showers; tile and grout alone are not waterproof.
- Cutting porcelain and stone with a power saw releases silica dust; use a wet saw outdoors or with extraction and a respirator.
Sources and further reading
- National Building Code of Canada 2025 (Division B, Part 9), National Research Council of Canada (Government of Canada Publications). Subsection 9.30.6 ceramic tile substrates; 9.23.15.3 panel edge support.
- Codes Canada, National Research Council Canada
Frequently asked questions
How many boxes of tile do I need for a 12 x 14 room?
The floor is 168 sq ft. With 12 x 24 in tiles at a 1/8 in joint and 10% waste that is 91 tiles, so 12 boxes of eight. Check your box label, because pieces per box vary by brand and size.
What does the National Building Code say about ceramic tile?
NBC 9.30.6 says ceramic tile must be set in a mortar bed or applied with a suitable adhesive to a sound, smooth base, and panel subfloors under adhesive-set tile must have their edges supported as Article 9.23.15.3 describes. Your province's code may add requirements.
Can I tile over a plywood subfloor?
Only over a stiff, flat, properly supported subfloor, usually with an underlayment such as cement board or an uncoupling membrane on top. Edge support of the panels is a code requirement for adhesive-set tile.
How much extra tile should I buy for a herringbone backsplash?
Plan on 15 to 20%. Herringbone needs angled cuts at every edge, and backsplashes have outlets and window returns that add more.
How much grout do I need for subway tile?
For 80 sq ft of 3 x 6 in tile with a 1/16 in joint the estimate is about 3.9 kg with 3/8 in thick tile and 10% waste. Narrow joints and small tiles use more grout per square foot than you might expect; buy one bag more than the estimate if the colour must match.
Is there an in-depth guide to the Tile Calculator?
Yes. “Estimating Concrete, Flooring, Tile and Gravel Without Running Short” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.