United Kingdom version. Metric by default with the UK standard 10.05 m roll in 52 or 53 cm widths, plus wide rolls, and the pattern repeat and match printed on UK roll labels. US version
Wallpaper Calculator (UK)
Count how many rolls of wallpaper a room needs from its size in metres, the 10.05 m roll, its width and the pattern repeat, with straight or half-drop matching.
The interactive tool loads here when JavaScript runs.
About this toolWhat is the Wallpaper Calculator?
A standard roll of wallpaper in the UK is 10.05 metres long and 52 or 53 cm wide, depending on the maker. The width matters more than it looks: in a 3.8 by 3.2 metre bedroom, 13.2 metres of wall to paper takes 25 drops at 53 cm but 26 at 52 cm. Pick the roll on the label and the calculator counts drops, not square metres.
Pattern repeat is the bigger cost. Each drop has to start at the same point of the design, so it is cut to whole repeats. In a lounge with 2.7 metre walls and a 64 cm repeat, a straight match gives three drops per roll and needs 9 rolls; the same design with a half-drop match gives only two and needs 14.
The roll label gives the repeat in centimetres and the match type. Enter both, and use the batch number on the label to buy rolls that were printed together.
- Strip method with straight, half-drop and free matches
- Euro, wide and US double roll presets plus custom sizes
- Cut length, strips per roll and waste per strip shown
- Spare rolls and cost per roll
- Imperial and metric, runs in the browser with a share link
Updated
How to use the Wallpaper Calculator
- Enter the room length and width in metres, or switch to total wall width for a chimney breast or feature wall.
- Measure the height from the top of the skirting to the ceiling in several places and use the largest.
- Enter the width of doors and full-height openings such as patio doors. Do not take out windows.
- Choose the 53 cm or 52 cm standard roll, or a wide roll, to match the label.
- Copy the match type and the pattern repeat from the label, then add a spare roll from the same batch.
Worked examples
Bedroom, 3.8 m x 3.2 m, plain paper
Input
2.4 m high, 0.8 m door, free match, 10 cm trim; 52 cm and 53 cm rolls
Output
26 drops (52 cm) or 25 drops (53 cm); 4 drops per roll; 7 rolls either way (8 to buy with the spare)
The extra drop at 52 cm happens not to cost a roll here, but on longer walls it can. Use the width printed on the roll.
Lounge with a large half-drop pattern
Input
4.5 m x 3.8 m, 2.7 m high, door and French doors 2.3 m wide, 53 cm rolls, 64 cm half-drop repeat
Output
27 drops cut at 3.52 m; 2 per roll; 14 rolls (15 to buy with the spare)
With a straight match the drops are 3.20 m, three come from each roll and 9 rolls do. A big half-drop design in a room with tall ceilings can cost half as much again.
Chimney breast feature wall
Input
Total wall width 1.5 m, 2.7 m high, 52 cm roll, 52 cm straight repeat
Output
3 drops cut at 3.12 m; 1 roll (2 to buy with the spare)
Three drops of 3.12 m use 9.36 m of the 10.05 m roll, so the spare roll is the one you will use if you pattern-match the return walls of the breast as well.
Background and insight
The standard European roll is 10.05 metres long and 0.53 metres wide, about 5.3 square metres, the size most papers sold in Europe and the UK are made to. American papers are usually priced per single roll but sold as double rolls, and the common 20.5 inch by 33 foot double roll covers about 56 square feet before waste. Always check the label: widths of 0.52, 0.68 and 0.70 metres and 27 inch American rolls are common too.
Pattern repeat is the vertical distance before the design repeats. With a straight match every strip starts at the same point of the pattern, so each cut is the wall height plus trim, rounded up to whole repeats. With a half-drop match alternate strips are offset by half a repeat, which on average costs half a repeat more per strip. A free or random match, such as a texture or stripe, has no repeat to honour and wastes the least.
This is why large repeats are expensive. On an 8 foot wall with a 21 inch repeat each cut is 105 inches, so a 33 foot double roll gives three strips and 81 inches of offcut. The same roll with no repeat gives three strips of 100 inches; a 2.5 metre cut from a Euro roll gives four strips with a free match but only three with a 53 cm repeat.
Common use cases
Whole rooms
Order the right number of rolls from one batch before the first strip goes up.
Feature walls
Price a single wall in a bold pattern, where the repeat often decides the roll count.
Comparing papers
See how a large-repeat design changes the cost against a plain one at the same roll price.
Murals and custom rolls
Enter any roll width and length for papers sold off the bolt.
Tips and limitations
- Buy all rolls with the same batch number and keep a spare from that batch for repairs.
- Lining paper hung horizontally first gives a smoother finish on old plaster; count it as a separate roll order.
- Textured coatings on older walls and ceilings can contain asbestos, so do not sand or scrape them before papering without checking.
- Paste-the-wall papers are quicker to hang but the count is the same: drops per roll still decide the rolls.
Sources and further reading
- Asbestos, Health and Safety Executive. Textured coatings in older homes that should not be sanded or scraped.
- Ladders and stepladders, Health and Safety Executive
- Wallpaper frequently asked questions, Graham and Brown. Pattern repeat and match types.
- Wallpapering: estimating the number of rolls of wallpaper, Practical DIY. The standard UK roll of 0.52 m x 10.05 m.
- Wallpaper: how to calculate how many rolls are needed, Bricoflor. The Euro roll of 0.53 m x 10.05 m.
Frequently asked questions
How many rolls of wallpaper do I need for a bedroom in the UK?
A 3.8 by 3.2 metre bedroom with 2.4 metre walls needs 7 standard rolls with a free-match paper, 8 with a spare, and 9 or more with a patterned paper, because fewer drops come from each roll. Enter your pattern repeat to see the count.
What size is a standard roll of wallpaper in the UK?
Most rolls are 10.05 metres long and 52 or 53 cm wide, about 5.2 to 5.3 square metres. Wide rolls of 70 cm and designer papers in other sizes are also sold, so check the label.
Why does half-drop wallpaper need more rolls?
Alternate drops are shifted down by half the repeat so the design lines up diagonally. That adds half a repeat to each cut, and with tall walls it can mean one fewer drop per roll.
Do I need extra rolls for a chimney breast?
Measure the front and both returns of the chimney breast and add them to the wall width. A chimney breast is where pattern matching uses the most paper, so a spare roll is sensible.
Should I hang lining paper before wallpaper?
On uneven or patched plaster, lining paper gives a smoother base and helps the paper adhere evenly. It is sold in its own rolls and hung across the wall, so estimate it separately.
How many drops do I get from a 10.05 m roll?
Four drops of 2.5 metres with a free match, which suits 2.4 metre walls. With a pattern repeat, divide the roll length by the cut length rounded up to whole repeats; on 2.7 metre walls it is often three or fewer.
Is there an in-depth guide to the Wallpaper Calculator?
Yes. “How Many Rolls of Wallpaper? The Strip Method Explained” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.