India version. Units (kWh) and rupees, 230 V appliances, and how to use your DISCOM slab rate, fixed charge, duty and time-of-day tariff when working out what one appliance costs. US version
Electricity Unit and Cost Calculator (India)
Work out how many units an AC, geyser or fan uses and what it adds to your electricity bill in rupees, at the slab rate from your state DISCOM tariff.
The interactive tool loads here when JavaScript runs.
About this toolWhat is the Electricity Cost Calculator?
Indian electricity bills count units, and one unit is one kWh. An appliance uses watts x hours / 1,000 units, so a 2,000 W geyser on for half an hour a day uses 1 unit a day and about 30 units a month. This calculator turns watts and hours into units, then into rupees at the rate you enter.
The rate to use is your slab rate, not the average of your bill. Most state tariffs for homes are telescopic: the first block of units each month is charged at a low rate and each further block at a higher one. Units added by a new AC are billed at the rate of the highest slab your monthly total reaches, so that is the figure that tells you what the AC really costs.
Fixed charges (per kW of sanctioned load or per connection) do not change with use, so leave them out. Charges added per unit, such as a fuel or power purchase cost adjustment, belong in the rate, and electricity duty charged as a percentage of energy charges can be added by raising the rate by that percentage. Tariffs are set by each State Electricity Regulatory Commission and change with each tariff order, so read the current rates on your own bill.
- Watts or amps x volts input, with quantity and standby draw
- Cost and kWh per hour, day, month and year
- Days-per-week setting for weekday or weekend use
- Typical appliance presets labelled as typical, with a comparison table at your price
- Any currency symbol; copy and share results
Updated
How to use the Electricity Cost Calculator
- Find the wattage on the appliance rating plate or BEE star label. For an inverter AC, its average draw is well below the maximum, so use a plug-in meter reading or the yearly units on the label if you have them.
- Enter hours per day and days per week. A geyser used only in winter can be worked out per month and multiplied by the winter months.
- Enter the energy charge per unit for your top slab from your bill, plus any per-unit adjustment, in rupees.
- Leave out the fixed charge and meter rent. Add electricity duty by raising the rate by the duty percentage.
- Read the units and the rupees per day, month and year.
Worked examples
1.5 ton inverter AC through the summer nights
Input
1,200 W average draw, 8 h a night, every day; ₹7 and ₹9 per unit (example slab rates)
Output
9.6 units a night; about 292 units and ₹2,044 a month at ₹7, ₹2,628 at ₹9
Adding 292 units to a household that already uses 150 a month can move the bill into higher slabs, so price the AC at the rate of the slab your total reaches. Over a year of daily use that is ₹24,528 at ₹7 and ₹31,536 at ₹9.
Geyser, half an hour every morning
Input
2,000 W storage geyser, 0.5 h a day, ₹7 per unit
Output
1 unit and ₹7 a day; about 30 units and ₹213 a month
Water heating is short but heavy. A timer or switching the geyser off after heating stops it reheating stored water all day.
Four ceiling fans: induction motor or BLDC
Input
4 fans, 12 h a day; 75 W against 28 W each; ₹7 per unit
Output
1,314 units and ₹9,198 a year against 491 units and ₹3,434
The fan wattages are examples; read the rating plate. A difference of about ₹5,800 a year across four fans is why the wattage is worth checking before buying.
Background and insight
A watt is a rate of energy use; a kilowatt-hour is 1,000 watts used for one hour. Energy = watts x hours / 1,000, and cost = kWh x price. Standby power is the small draw from chargers, set-top boxes and appliances with clocks or remote controls; at a few watts around the clock it adds up to tens of kWh a year per device.
Nameplate wattage is the most an appliance draws. Thermostat-controlled devices such as fridges, freezers, heaters and air conditioners cycle on and off, so their average draw over a day is much lower than the label. For those, measure with a plug-in energy meter or use the yearly kWh on an EnergyGuide label, and enter the average watts. Amps times volts gives apparent power; for motors and compressors the real power in watts can be noticeably lower.
Many bills add fixed daily charges, taxes and tiered or time-of-use rates. Use the energy charge per kWh for the period when the appliance runs; the fixed charges do not change with use.
Common use cases
Understanding a high bill
Price the big loads (heaters, dryers, AC, EV charging) to see which one moved the bill.
Comparing appliances before buying
Compare the yearly running cost of two models with different wattages to see if the efficient one pays back.
Home office and crypto rigs
Work out the electricity cost of a PC, server or workshop machine running long hours.
Landlords and shared houses
Split the cost of a shared appliance fairly by measured use.
Tips and limitations
- Your bill lists units consumed, the slab-wise energy charges and any fixed charge, adjustment and duty. Dividing the total bill by the units gives an average that understates what extra units cost; use the per-unit rate of your top slab.
- If a state scheme gives you a block of free or subsidised units, appliances that keep you under that block cost little, and the next unit above it is charged in full. Check your scheme.
- With a smart meter on a time-of-day tariff, units used in solar hours are charged less and units in the evening peak more. Run the calculator once for each rate.
- Leave appliances switched off at the plug rather than on standby; set-top boxes and chargers draw power all day.
Sources and further reading
- Time of Day tariff and the Electricity (Rights of Consumers) Amendment Rules, 2023, Press Information Bureau, Ministry of Power. ToD tariff for consumers other than agriculture from not later than 1 April 2025, effective after smart meter installation.
- Default temperature setting of room air conditioners at 24°C, Press Information Bureau, Ministry of Power. BEE notification making 24°C the default setting for star-labelled room air conditioners.
- MSEDCL multi-year tariff order, FY 2025-26 to FY 2029-30: press note, Maharashtra Electricity Regulatory Commission. An example of a state tariff order, with residential consumption billed on a telescopic tariff. Later review orders changed some rates; check your DISCOM for current figures.
Frequently asked questions
How do I calculate electricity units for an appliance?
Units = watts x hours used / 1,000. A 1,500 W heater on for 2 hours uses 3 units. Multiply by the days you use it for a month and by your per-unit rate for the cost.
Which rate should I use with slab tariffs?
The energy charge of the highest slab your monthly units fall into. Under a telescopic tariff the extra units an appliance adds are billed at that top rate, even though your bill also has cheaper units in the lower slabs.
How much does a 1.5 ton AC cost to run per month?
It depends on its average draw, hours and your slab rate. At an average of 1,200 W for 8 hours a night it uses about 292 units a month, which is ₹2,044 at ₹7 a unit and ₹2,628 at ₹9. BEE rules require star-labelled room ACs to come set to 24°C by default, and a higher set point means fewer units.
Do fixed charges change with how much I use?
No. Fixed or demand charges are based on the sanctioned load or the connection, so they stay the same whether an appliance runs or not. Leave them out of the cost of one appliance.
What is a time-of-day electricity tariff?
A tariff with different rates by time: lower during the solar hours set by your state commission and higher at peak times. The Ministry of Power rules made it due for most consumers other than agriculture from 1 April 2025, applied once smart meters are installed, but states are rolling it out at different speeds.
How many units does a geyser use?
A 2,000 W geyser uses 2 units for every hour its element is on. Heating a tank once for half an hour is 1 unit, about 30 units a month, or ₹213 a month at ₹7 a unit.
Is there an in-depth guide to the Electricity Cost Calculator?
Yes. “Roof Pitch, Stair Layout, AC Sizing and Running Costs Explained” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.