Australia version. Australian plasterboard sizes: 1200 mm sheets from 2400 to 6000 mm long, rooms in metres, screws per m², tape in metres, compound in litres and prices in A$. US version

Plasterboard Calculator (Australia)

How many plasterboard sheets a room needs in 2400 to 6000 mm lengths, less doors and windows, with screws, tape, base coat and sheet weight in metric and A$.

The interactive tool loads here when JavaScript runs.

About this tool

What is the Drywall Calculator?

Australian plasterers commonly sheet walls and ceilings in 10 mm plasterboard, 1200 mm wide, and use long sheets of 3600, 4800 or 6000 mm laid horizontally to cut the number of butt joints. This version offers those lengths and works in metric rates for screws, tape and compound.

A 3.6 x 3.4 m bedroom with a 2.4 m ceiling, a door and a 1810 x 1200 mm window has 42 m² to sheet. In 2400 mm sheets that is 17 sheets with 10% extra; in 3600 mm sheets it is 11, with fewer joints to set.

Long sheets are heavy. A SafeWork SA procedure gives a 6 m x 1.2 m x 10 mm sheet as 49 kg, about 6.8 kg per m², and plans mechanical aids for unloading and a two-person team lift for carrying. At that rate the bedroom board weighs about 330 kg in total.

  • Walls, ceiling, openings, extra area and multiple identical rooms
  • Sheet sizes from 4x8 to 54 in x 12 ft and 1200 x 2400 to 3000 mm
  • Editable screw, tape and compound rates with pails and rolls
  • Board cost, imperial and metric with feet-inch input
  • Copy results and share a link with your inputs
Read the guide: How Much Drywall, Mud and Tape? Estimating a Room

Updated

How to use the Drywall Calculator

  1. Keep the units on metric and enter the room length, width and ceiling height in metres.
  2. Enter the door and window frame openings in mm; tick the ceiling if it is being sheeted.
  3. Choose the sheet length the plasterer will hang: 2400 for vertical sheets, 3600 to 6000 for horizontal sheeting.
  4. Set the screws per m², tape and compound rates to suit your system, and the price per sheet in A$.

Worked examples

Bedroom in 2400 mm sheets

Input

3.6 x 3.4 m, 2.4 m ceiling, ceiling sheeted, one 820 x 2040 mm door, one 1810 x 1200 mm window, 1200 x 2400 sheets, 10% extra, A$20 a sheet

Output

42 m² net; 17 sheets (16.04 exact); 490 screws at 10 per m²; about 51 m of tape and 15.5 L of compound; A$340

Walls are 33.6 m² and the ceiling 12.24 m². The 49 kg-per-7.2 m² figure puts the board at about 333 kg.

The same bedroom in 3600 mm sheets

Input

As above, 1200 x 3600 sheets at A$30

Output

11 sheets (10.69 exact); 47.52 m² of board; A$330

A 3.6 m sheet runs the full wall length, so each wall is two horizontal sheets with no butt joint in the middle.

Living room in 6000 mm sheets

Input

6.0 x 4.2 m, 2.4 m ceiling, ceiling sheeted, one door, one 2400 x 2100 mm sliding door opening, 1200 x 6000 sheets, A$50 a sheet

Output

67.45 m² net; 11 sheets; about 82 m of tape and 25 L of compound; A$550; about 539 kg of board

Six-metre sheets are a two-person or lifter job and need clear access through the house, so check the route before ordering them.

Background and insight

Wall area is the room perimeter times the height; the ceiling is length times width. Openings come off the total, and a waste allowance of 10 to 15% covers cut-offs at doors, windows and corners. Longer sheets reduce the number of butt joints, which are the hardest to finish, so a 12 ft room is often hung with 12 ft sheets even though the sheet count barely changes.

For finishing materials the calculator uses typical rates and labels them as such: about 32 screws per 4x8 sheet (one per square foot, from screws at 12 in centres on ceilings and 16 in on walls per GA-216 and the board makers' instructions), about 370 ft of paper tape per 1,000 square feet of board (USG's published coverage), and about 9.4 gallons of ready-mixed all-purpose compound per 1,000 square feet for taping and three coats. Lightweight and setting compounds cover differently, so edit the rate to suit.

Common use cases

  • Ordering board for a renovation

    Count sheets per room and add rooms of the same size before calling the supplier.

  • Basement finishing

    Estimate walls only, with tall or short sheets, for a basement with exposed or dropped ceilings.

  • Planning finishing labour

    Use tape and compound quantities to plan coats and buckets for a taping crew.

  • Comparing sheet sizes

    See how 4x8, 4x12 and 54 in sheets change the count and the number of joints.

Tips and limitations

  • Wet areas need water-resistant board and a waterproofing system to the NCC wet-area rules; do not use standard board in a shower.
  • Cornice is ordered by the metre: the room perimeter plus about 10%, in the lengths your supplier stocks.
  • Store sheets flat on dunnage in a dry, covered area and keep the delivery close to where they will be hung.

Sources and further reading

  1. Hazardous manual tasks safe work procedure: handling plasterboard (residential), SafeWork SA. Six-metre 10 mm sheets at 49 kg, with mechanical aids and team handling.
  2. NCC 2025 Volume Two, Part H1 Structure, Australian Building Codes Board. Timber framing to AS 1684, which sets the frame the sheets are fixed to.
  3. Sheetrock Brand Paper Joint Tape, USG. Source of the default tape rate, converted to 121 m per 100 m².
  4. How much Sheetrock Brand UltraLightweight All Purpose Joint Compound do I need?, USG. About two 4.5 US gal pails per 1,000 sq ft of board, comparable to other USG ready-mixed compounds; converted here to 37 L per 100 m².

Frequently asked questions

How many sheets of plasterboard do I need for a room?

Add the wall area and the ceiling area in m², take off doors and large windows, add about 10% and divide by the sheet area: 2.88 m² for 2400 mm, 4.32 m² for 3600 mm, 7.2 m² for 6000 mm sheets. A 3.6 x 3.4 m bedroom takes 17 sheets of 2400 or 11 of 3600.

What thickness of plasterboard is used in Australian houses?

10 mm is commonly used for walls and many ceilings, 13 mm for wider ceiling framing, better sound control or where a system needs it, and fire-rated and water-resistant boards are separate products. The board maker's guide gives the frame centres for each.

How heavy is a sheet of plasterboard?

SafeWork SA uses 49 kg for a 6 m x 1.2 m x 10 mm sheet, about 6.8 kg per m². A 2400 x 1200 sheet of the same board is about 20 kg. Plan for two people, trolleys and a sheet lifter for ceilings.

Why do plasterers use long sheets?

Long sheets laid horizontally span a whole wall, so there are fewer butt joints, which are the hardest joints to set flat. They are heavier and need a clear path into the room.

How much tape and compound do I need?

At the default rates, about 121 m of tape and 37 L of ready-mixed compound per 100 m² of board, converted from USG's published rates for its paper tape and ready-mixed compound. Australian systems often use a powder base coat and a ready-mixed top coat; replace the rates with the coverage printed on your products.

Is there an in-depth guide to the Drywall Calculator?

Yes. “How Much Drywall, Mud and Tape? Estimating a Room” covers the background, how it works, common pitfalls and worked examples. Read the full guide.