United Kingdom version. Millimetres and cc by default, with the cc limits UK riders and owners meet: the 125 cc A1 licence, motorcycle VED bands and the pre-2001 car tax split. US version
Engine Size Calculator (cc)
Work out engine size in cc from bore and stroke in millimetres, check a rebore against the 125 cc learner limit and VED cc bands, and know when DVLA needs telling.
The interactive tool loads here when JavaScript runs.
About this toolWhat is the Engine Displacement Calculator?
In the UK an engine's size is its cylinder capacity in cc, the figure printed on the V5C logbook and used for some vehicle tax bands and motorcycle licence categories. This version works in millimetres and cc: enter bore, stroke and cylinder count, and it gives the capacity, the bore/stroke ratio and what an oversize piston would add.
A few cc matter more than you might think. A learner on an A1 licence may ride a motorcycle of up to 125 cc and 11 kW. Motorcycle VED is charged in bands (up to 150 cc, 151 to 400, 401 to 600, over 600), and cars registered before 1 March 2001 are taxed by whether the engine is over 1,549 cc. A rebore can push an engine across one of those lines, and GOV.UK lists a change of cylinder capacity among the things you must update on the V5C.
- Displacement in cc, litres and cubic inches at once, with per-cylinder volume
- Solve for bore or stroke from a target displacement in any of the three units
- Overbore gain, bore/stroke ratio with oversquare or undersquare label, and mean piston speed
- Inch and millimetre inputs that convert in place, plus a table for other cylinder counts
- Copy results and share a link with your inputs
Updated
How to use the Engine Displacement Calculator
- Choose inches or millimetres for bore and stroke.
- Leave "Solve for" on Displacement and enter bore, stroke and the number of cylinders.
- Read total displacement in cc, litres and cubic inches, plus the per-cylinder volume and bore/stroke ratio.
- To plan a rebore, enter the oversize (for example 0.030 in) and read the new displacement and the gain.
- To hit a target size, switch "Solve for" to Bore or Stroke, enter the target in cc, litres or cubic inches, and read the required dimension.
Worked examples
Rebore on a 125 cc learner bike
Input
54 mm bore, 54.5 mm stroke, 1 cylinder, 0.5 mm oversize
Output
124.82 cc standard; 127.14 cc after the rebore
A half-millimetre oversize piston adds 2.3 cc and takes the engine past the 125 cc ceiling of the A1 category. Check with your insurer and DVLA before boring out a bike a learner or A1 rider will use.
Classic car near the 1,549 cc VED line
Input
80 mm bore, 77 mm stroke, 4 cylinders, 0.5 mm oversize
Output
1,548.18 cc standard; 1,567.59 cc at +0.5 mm
For a car first registered before 1 March 2001, GOV.UK sets one rate for engines not over 1,549 cc and a higher one above it. At standard bore this engine is under the line by less than 1 cc; the rebore takes it over, and the new capacity goes on the V5C.
Is a "400" twin really 400 cc?
Input
70 mm x 52 mm, 2 cylinders; then 68 mm x 55 mm
Output
400.24 cc; 399.48 cc
Motorcycle VED changes band at 400 cc (151 to 400, then 401 to 600). The exact capacity from bore and stroke, as recorded on the V5C, is what counts, not the number on the side panel.
Background and insight
One cylinder sweeps a cylinder of air with the bore as its diameter and the stroke as its height: V = π/4 x bore² x stroke. Multiply by the cylinder count for the engine total. Because bore is squared, it moves displacement faster than stroke does: a 1% larger bore adds about 2% volume, a 1% longer stroke adds 1%. One cubic inch is exactly 16.387064 cc, since the inch is defined as 25.4 mm.
Advertised sizes are rounded. A Honda K20 is 86 x 86 mm, which works out to 1,998.2 cc and is sold as a 2.0 litre; Ford's 302 measures 301.6 cu in. Rotary and two-stroke engines are counted differently for racing and tax purposes, so check the rulebook if a class limit is at stake.
The bore/stroke ratio says something about character. Oversquare engines (ratio above 1) have room for larger valves and lower piston speed at a given rpm, so they tend to rev; undersquare engines trade that for a compact chamber and strong low-speed torque. Mean piston speed, 2 x stroke x rpm, is a rough check on how hard the rotating parts work: around 20 m/s is common for road engines at their redline, and racing engines run higher with lighter parts.
Common use cases
Engine builds and strokers
Plan the bore and stroke combination that reaches a target size, and see what a rebore adds before the block goes to the machine shop.
Class and registration limits
Check a motorcycle, kart or race engine against a displacement limit after an overbore.
Spec sheet checks
Confirm a quoted engine size from published bore and stroke, and convert between cc, litres and cubic inches.
Teaching engine basics
Show how bore, stroke and cylinder count combine, and why bore has twice the effect of stroke on volume.
Tips and limitations
- The cylinder capacity on the V5C is the official figure. Compare it with what the calculator gives from bore and stroke after any engine work.
- Machine shops in the UK quote oversizes in millimetres (+0.25, +0.50, +1.00 mm) for most modern engines and in thou for older British and American ones. Set the units to match the piston box.
- Swapping in a different engine, or changing the cylinder capacity, is a change you must report on the V5C. Your insurer will also want to know.
- Motorcycle vehicle tax depends on engine size alone; for cars registered from March 2001 it depends on CO2 and list price, so cc matters there mainly for older cars.
Sources and further reading
- Motorcycle and moped licence categories, ages and requirements, GOV.UK. A1 at 125 cc and 11 kW, A2 at 35 kW
- Rates for cars and light goods vehicles registered before 1 March 2001, GOV.UK. Rates split at 1,549 cc
- Other vehicle tax rates, GOV.UK. Motorcycle rates by engine size band
- Change vehicle details on a V5C registration certificate, DVLA. Engine and cylinder capacity changes must be reported
Frequently asked questions
What engine size can I ride on an A1 licence?
GOV.UK defines A1 as a light motorcycle up to 125 cc, up to 11 kW and with a power-to-weight ratio of no more than 0.1 kW per kg, from age 17. A2 has no cc limit but caps power at 35 kW.
Do I need to tell DVLA if I rebore my engine?
GOV.UK lists "cylinder capacity (cc)" and "engine" among the changes you must update on your V5C. A rebore that changes the capacity therefore needs reporting, as does an engine swap.
How is motorcycle road tax worked out by engine size?
By cc band: not over 150 cc, 151 to 400 cc, 401 to 600 cc and over 600 cc, with zero-emission bikes in the lowest rate. The rates change each April, so check the current table on GOV.UK.
Why does my 1.6 car count as under 1,549 cc?
Engine badges are rounded. An 80 x 77 mm four comes to 1,548 cc, which is sold as a 1.6 but sits just under the 1,549 cc line used for cars registered before March 2001.
Is cc the same as cm³?
Yes. One cc is one cubic centimetre, and 1,000 cc is one litre. The calculator also shows cubic inches for American engines and parts catalogues.
Is there an in-depth guide to the Engine Displacement Calculator?
Yes. “Engine Displacement Explained: Bore, Stroke, CC and Cubic Inches” covers the background, how it works, common pitfalls and worked examples. Read the full guide.
Related Tools You May Like
Free, in-browser tools that pair well with this one.