TMT Bar Weight per Metre, D²/162 and ISMB Weights

Why D²/162 gives TMT bar weight per metre, the IS 1786 masses and tolerances to check a bundle, bars per tonne, ISMB 200 and MS plate weights in kg.

By · · 9 min read

Illustration for the Steel Weight Calculator guide

India edition. Written for Indian sites: TMT bar masses and weight tolerances from IS 1786:2008, the D²/162 rule, ISMB sections from IS 808:1989, MS plate in kg, BIS marking under the Ministry of Steel quality control orders, and costs in rupees per kg. US edition

On an Indian site steel is bought by the kilogram and fixed by the bar, so two questions come up every day: how much does this many bars weigh, and did the supplier deliver full weight. For TMT bars the answer is the rule every site engineer learns, D²/162 kg per metre with D in millimetres. A 12 mm bar is 144/162 = 0.889 kg/m, so one 12 m bar is about 10.7 kg and a tonne holds about 94 bars. This edition shows where 162 comes from, which masses and tolerances IS 1786 actually sets, how to check a delivered bundle, and how ISMB sections and MS plate are weighed. The Steel Weight Calculator (India) does each step.

Where D²/162 comes from

A bar's mass per metre is its cross-section area times the density of steel. IS 1786:2008, clause 7.2.1, fixes that density for checking nominal mass as 0.00785 kg per mm² of cross-section per metre, which is the same as 7,850 kg/m³. For a round bar of diameter D:

mass per metre = (π/4) x D² x 0.00785 = D² / 162.2

So 162 is just 162.2 rounded. The rounding makes the rule about 0.1% heavy, which never matters on site but explains why the calculator shows 0.888 kg/m for a 12 mm bar where D²/162 gives 0.889.

IS 1786 nominal masses

IS 1786:2008 Table 1 lists the nominal sizes with their area and mass. The common ones, with the calculator's results and the number of 12 m bars in a tonne:

SizeIS 1786 areaIS 1786 massCalculatorOne 12 m bar12 m bars per tonne
8 mm50.3 mm²0.395 kg/m0.395 kg/m4.74 kg211
10 mm78.6 mm²0.617 kg/m0.617 kg/m7.40 kg135
12 mm113.1 mm²0.888 kg/m0.888 kg/m10.65 kg93.9
16 mm201.2 mm²1.58 kg/m1.578 kg/m18.94 kg52.8
20 mm314.3 mm²2.47 kg/m2.466 kg/m29.59 kg33.8
25 mm491.1 mm²3.85 kg/m3.853 kg/m46.24 kg21.6
32 mm804.6 mm²6.31 kg/m6.313 kg/m75.76 kg13.2

The standard also lists 4, 5, 6, 28, 36 and 40 mm. Its foreword notes that 7, 18, 22, 45 and 50 mm were removed when the sizes were rationalised, so a 22 mm bar on an old drawing is not a current IS 1786 size.

The grade (Fe 415, Fe 415D, Fe 415S, Fe 500, Fe 500D, Fe 500S, Fe 550, Fe 550D or Fe 600, the list in clause 1.1 as substituted by Amendment No. 1 of November 2012, which is bound into the public copy) changes strength and ductility, not weight. A 12 mm Fe 500D bar weighs the same 0.888 kg/m as a 12 mm Fe 415 bar.

Checking a delivered bundle against the tolerance

IS 1786 Table 2 sets how far the measured mass may differ from nominal:

Nominal sizeBatchIndividual sample
Up to and including 10 mm±7%−8%
Over 10 up to and including 16 mm±5%−6%
Over 16 mm±3%−4%

Weighing is the simplest test you can run at the gate. A worked check for a bundle of fifty 8 mm bars, each 12 m long:

  1. In the calculator choose round bar, 8 mm, length 12 m, quantity 50. The nominal mass is 236.75 kg (0.395 kg/m).
  2. Apply the ±7% batch tolerance for sizes up to 10 mm: 236.75 x 0.93 = 220.2 kg and 236.75 x 1.07 = 253.3 kg.
  3. If the weighbridge or platform scale shows less than about 220 kg, the bars are under size, and you are paying per kg for steel that will not give the area the designer counted on.

For 12 mm bars the band narrows to ±5%: a bundle of one hundred 12 m bars is 1,065.4 kg nominal, so anything from about 1,012 kg to 1,119 kg passes. Note that the tolerance is on mass per metre, so measure the bars too. IS 1786 clause 7.1 lets bars cut to a specified length be up to 75 mm long or 25 mm short.

BIS marking

Weight is only one check. IS 1786 is on the list of steel standards notified under the Ministry of Steel's quality control orders. In its answer to Lok Sabha unstarred question 3149 (6 August 2018), the Ministry said these orders are issued so that substandard or defective steel is not produced, sold, traded, imported or stocked in India unless it bears the BIS mark, and its annexure lists IS 1786:2008 and IS 2062:2011. Look for the standard mark and grade on the bundle tag along with the weight.

Worked example: steel for a G+1 house slab

A bar bending schedule for one slab calls for one hundred 12 mm bars and thirty 16 mm bars, all 12 m long. In the calculator:

BarsInputsResult
12 mmround bar 12 mm, 12 m, qty 1000.888 kg/m, 10.65 kg per bar, 1,065.4 kg
16 mmround bar 16 mm, 12 m, qty 301.578 kg/m, 18.94 kg per bar, 568.2 kg

The order is 1,633.6 kg, about 1.63 tonnes. If the dealer quotes ₹62 per kg before GST (an example rate; actual prices vary), enter ₹62 in the price box: the 12 mm bars come to about ₹66,053 and the 16 mm bars about ₹35,228, before GST, loading and cutting charges. Add wastage and laps from your bar bending schedule, not from the tonnage.

ISMB, ISMC and angles: use the IS 808 table

For rolled sections, IS 808:1989 Table 2.1 gives ISMB 200 as 24.2 kg/m, with a depth of 200 mm, flange width 100 mm, web 5.7 mm and flange 10.0 mm. Entered as an I-beam with those dimensions, the calculator returns 23.75 kg/m, about 1.8% light. The difference is the root fillets and the sloping flanges (IS 808 rolls medium-weight beams with a 98° flange slope), which a parallel-flange formula leaves out.

So for ISMB, ISMC and ISA sections, bill and lift on the IS 808 table mass: a 6 m ISMB 200 is 145.2 kg, against 142.5 kg from the formula. Use the calculator for built-up sections, plates, flats, pipes and anything not in the table.

MS plate and flats

Plate is the easy case because there are no fillets. Each millimetre of thickness weighs 7.85 kg per square metre:

  • A 2,500 x 1,250 mm sheet of 10 mm MS plate: 3.125 m² x 78.5 = 245.3 kg.
  • The same size in 8 mm: 196.3 kg.
  • A 100 x 10 mm flat: 1,000 mm² x 0.00785 = 7.85 kg/m, so a 6 m length is 47.1 kg.

For chequered plate, the raised pattern adds weight that the flat-plate formula ignores, so use the mill or dealer's figure for it.

Common mistakes on Indian sites

  • Using 0.89 for every 12 mm calculation on a big job. Over 50 tonnes the 0.1% from rounding 162.2 to 162 is only about 60 kg, but mixing it with the IS 1786 table mass in one estimate causes small mismatches in BBS totals. Pick one.
  • Mixing up batch and individual limits. A batch is judged on ±7%, ±5% or ±3%; an individual sample on the wider minus limits of 8%, 6% or 4%. Know which test you are applying.
  • Treating section names as exact. ISMB 200 is 24.2 kg/m, not 20 or 200 of anything; the name is the depth.
  • Pricing on the bundle tag weight without weighing. If you pay per kg, the weighbridge figure is the one that counts.

Tools for this job

The beam side of the same job is covered in the beam deflection formulas guide for India.

Frequently asked questions

What is the weight of one 12 mm TMT bar of 12 m?

10.65 kg. IS 1786 gives 0.888 kg per metre for 12 mm, and 0.888 x 12 = 10.65 kg. With D²/162 you get 10.67 kg, which is close enough for a site estimate.

How much can a TMT bar bundle weigh less than the calculated weight?

Under IS 1786 Table 2, a batch of bars up to 10 mm may be 7% under or over the nominal mass, bars over 10 mm up to 16 mm 5%, and bars over 16 mm 3%. An individual sample has slightly wider minus limits of 8%, 6% and 4%.

Do Fe 500 and Fe 550 bars weigh differently?

No. The grade number is the minimum yield or proof stress in N/mm². Mass depends only on the nominal size, so a 16 mm bar weighs 1.58 kg/m in every grade.

How do I calculate the weight of an ISMB section?

Read it from IS 808: ISMB 200 is 24.2 kg/m, so multiply by the length. A formula from the plate dimensions comes out about 2% light because it misses the root fillets and sloping flanges.

Sources and further reading

Open the Steel Weight Calculator

More Civil & Structural

Every tool in the Civil & Structural section, free and in your browser.